Pure Vintage Boogie – The Legendary Mark IIC+ Returns
Set yourself apart with this Custom Configured version of the Mark IIC+ Head, customized with eye-grabbing Emerald Bronco vinyl that is paired with a Wicker grille and accented with tan piping, a heavy-duty tan handle, and tan leather corners. This is the only way to get a Mark IIC+ Head in Emerald Bronco, so order yours today while they’re still available.
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the third generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the Pull Shift voicing features – some mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their center points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The rear panel of the C+ provides the important features that keep this amp as relevant as ever, 40 years after its initial run. Global Presence and Reverb controls are centered for easy navigation from the front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left, from the front) allows for your choice of the full 75 watts of “Simul-Class” power for richness, authority, and max headroom or “Class A” for 25 watts of reduced power and low end, along with easier, smoother power clip at lower volumes. One 8 ohm and two 4 ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated direct output for consoles or interfaces, a Slave tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide compliance regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic tone and the passionate faithful who’ve made it mythical.
Key Features:
- Custom Configured in Emerald Bronco vinyl with a Wicker grille
- An authentic recreation of the legendary MESA/Boogie Mark IIC+ Head
- Footswitchable Dual Mode preamp
- Selectable Simul-Class (75 watts) or Class A (25 watts) power
- Built-in footswitchable tube-driven Spring Reverb
- Footswitchable 5-Band Graphic EQ
- Slave Output for use with wet/dry/wet rigs and external IR readers
- Series, buffered Effects Loop
Specifications
Quick overview
Quick overview
available formats: Testata e 1x12 Combo
channels modes: Canale singolo/modalità doppia (RHYTHM e LEAD)
dimensions: 9 1/4 H X 18 3/4 W X 10 3/8 DA 23,49 cm X L 47,62 cm X P 26,23 cm
Foot Switchable Functions: Modalità, EQ, riverbero
graphic eq reverb fx solo: FX Loop/equalizzatore grafico a 5 bande/riverbero
Mode Voicings Styles: RHYTHM - Pulito tradizionale e gain vintage, Volume 1 indipendente (Gain) con Pull Bright e Master 1 con Pull Deep per impostare il gain iniziale indipendentemente dal volume di esecuzioneLEAD – Gain a cascata (Lead), utilizza il Volume 1 per impostare la potenza del gain iniziale; dotato di Independent Lead Drive (Gain) con Pull Lead (per la selezione manuale del canale) e Lead Master con Pull Deep per regolare il livello del gain a cascata indipendentemente dal volume di esecuzione
power tube type: 4 x valvole Mesa 6L6
speakers impedance: N/D
wattage: 75 o 25 watt (complessivi)
weight: 39 lb | 17,69 kg
Features
Features
amp type: Valvolare
bias switch for alternate power tubes types: N/D
built in power amp attenuation: N/D
cabinet simulation direct liverecording output: N/D
channel controls: Controlli condivisi RHYTHM/LEAD: Volume 1 (imposta la potenza del gain iniziale di entrambi i canali), Treble, Bass, Middle, equalizzatore grafico a 5 bande assegnabile/attivabile con footswitch, Reverb e Presence
chassis material: Acciaio
convection or fan cooling: Raffreddamento a ventola
effects loop bypass options: Valvolare, Serie FX Loop
external switching jack options andor midi: N/D
extra features: N/D
global output level control: N/D
global solo level control: N/D
graphic eq andor contour: Equalizzatore grafico a 5 bande
headphone output: N/D
internal amp load for speaker less performance: N/D
maintenance free fixed bias: Sì
number of footswitchable channels or modes: Canale singolo, doppia modalità
number of style modes: 2
power amp details class wattage: Esclusivo amplificatore Simul-Class™ – Offre contemporaneamente i vantaggi della classe A vintage e della classe A/B moderna
power amp tubes: 4 x 6L6
preamp tubes: 5x 12AX7
rectifier tubes: N/D
rectifier type: Diodi al silicio
reverb effects bypass options: Bypass EQ
slave output: Sì
speaker outputs: 1 x 8 Ohm e 2 x 4 Ohm
true bypass options: N/D
tuner output: N/D
types of style modes per channel: Modalità RHYTHM - Pulito tradizionale e gain vintage, Volume 1 indipendente (Gain) con Pull Bright e Master 1 con Pull Deep per impostare il gain iniziale indipendentemente dal volume di esecuzioneModalità LEAD – Gain a cascata (Lead), utilizza il Volume 1 per impostare la potenza del gain iniziale; dotato di Independent Lead Drive (Gain) con Pull Lead (per la selezione manuale del canale) e Lead Master con Pull Deep per regolare il livello del gain a cascata indipendentemente dal volume di esecuzione
variac power switch: N/D
wattages quick reference: 75 o 25 watt (complessivi)
Cabinet features
Cabinet features
cabinet material: Grado marino, Betulla del baltico
casters: N/D
custom finish options: N/D
extra features: N/D
speakers impedance: N/D
standard finish options no extra cost: Vinile Black Bronco, griglia in iuta nera, profili neri, maniglia nera/cromata e angoli in metallo
Accessories
Accessories
footswitch: Due: 1 x footswitch a pulsante singolo (modalità 1/2), 1 x footswitch a due pulsanti (riverbero/EQ)
slip cover: Incluso - Fodera aderente
Weights and dimensions
Weights and dimensions
depth: 10 3/8 D | P 26,23 cm
height: 9 1/4 H | A 23,49 cm
weight: 39 lb | 17,69 kg
width: 18 1/2 W | L 46,35 cm
Model: 2.MCP.V11.G07.P03bod
Mesa/Boogie Custom Configured Mark IIC+ Head, Emerald Bronco
Mesa/Boogie Custom Configured Mark IIC+ Head, Emerald Bronco
Spedizione Gratuita & Veloce
Spedizione Gratuita & Veloce
Gli ordini effettuati entro le 13:00 dal lunedì al venerdì verranno elaborati lo stesso giorno. Gli ordini effettuati dopo questo orario verranno spediti il giorno lavorativo successivo. Tutti gli ordini superiori a 50 € riceveranno la spedizione standard gratuita.
Garanzia Limitata
Garanzia Limitata
Acquista e suona con fiducia, sapendo che il tuo amplificatore è protetto dalla nostra garanzia limitata di 5 anni. Su garanzie ed esclusioni, scopri di più qui .
Cablaggio Manuale in California
Cablaggio Manuale in California
Every MESA/Boogie amplifier has been hand-wired in the same Petaluma, California, facility for more than 45 years.
Opzioni Disponibili Configurate su Misura
Opzioni Disponibili Configurate su Misura
Chiamaci al Gibson Garage di Londra per costruire il tuo amplificatore Custom Configured. +44 20 4570 5400
Tre Mesi Gratuiti dell’App Gibson
Tre Mesi Gratuiti dell’App Gibson
Per un periodo limitato, ricevi un abbonamento gratuito di tre mesi all’App Gibson con l’acquisto di questo prodotto. Clicca qui per saperne di più sull’App Gibson.
Pure Vintage Boogie – The Legendary Mark IIC+ Returns
Set yourself apart with this Custom Configured version of the Mark IIC+ Head, customized with eye-grabbing Emerald Bronco vinyl that is paired with a Wicker grille and accented with tan piping, a heavy-duty tan handle, and tan leather corners. This is the only way to get a Mark IIC+ Head in Emerald Bronco, so order yours today while they’re still available.
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the third generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the Pull Shift voicing features – some mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their center points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The rear panel of the C+ provides the important features that keep this amp as relevant as ever, 40 years after its initial run. Global Presence and Reverb controls are centered for easy navigation from the front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left, from the front) allows for your choice of the full 75 watts of “Simul-Class” power for richness, authority, and max headroom or “Class A” for 25 watts of reduced power and low end, along with easier, smoother power clip at lower volumes. One 8 ohm and two 4 ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated direct output for consoles or interfaces, a Slave tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide compliance regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic tone and the passionate faithful who’ve made it mythical.
Key Features:
- Custom Configured in Emerald Bronco vinyl with a Wicker grille
- An authentic recreation of the legendary MESA/Boogie Mark IIC+ Head
- Footswitchable Dual Mode preamp
- Selectable Simul-Class (75 watts) or Class A (25 watts) power
- Built-in footswitchable tube-driven Spring Reverb
- Footswitchable 5-Band Graphic EQ
- Slave Output for use with wet/dry/wet rigs and external IR readers
- Series, buffered Effects Loop
Specifications
Quick overview
Quick overview
available formats: Testata e 1x12 Combo
channels modes: Canale singolo/modalità doppia (RHYTHM e LEAD)
dimensions: 9 1/4 H X 18 3/4 W X 10 3/8 DA 23,49 cm X L 47,62 cm X P 26,23 cm
Foot Switchable Functions: Modalità, EQ, riverbero
graphic eq reverb fx solo: FX Loop/equalizzatore grafico a 5 bande/riverbero
Mode Voicings Styles: RHYTHM - Pulito tradizionale e gain vintage, Volume 1 indipendente (Gain) con Pull Bright e Master 1 con Pull Deep per impostare il gain iniziale indipendentemente dal volume di esecuzioneLEAD – Gain a cascata (Lead), utilizza il Volume 1 per impostare la potenza del gain iniziale; dotato di Independent Lead Drive (Gain) con Pull Lead (per la selezione manuale del canale) e Lead Master con Pull Deep per regolare il livello del gain a cascata indipendentemente dal volume di esecuzione
power tube type: 4 x valvole Mesa 6L6
speakers impedance: N/D
wattage: 75 o 25 watt (complessivi)
weight: 39 lb | 17,69 kg
Features
Features
amp type: Valvolare
bias switch for alternate power tubes types: N/D
built in power amp attenuation: N/D
cabinet simulation direct liverecording output: N/D
channel controls: Controlli condivisi RHYTHM/LEAD: Volume 1 (imposta la potenza del gain iniziale di entrambi i canali), Treble, Bass, Middle, equalizzatore grafico a 5 bande assegnabile/attivabile con footswitch, Reverb e Presence
chassis material: Acciaio
convection or fan cooling: Raffreddamento a ventola
effects loop bypass options: Valvolare, Serie FX Loop
external switching jack options andor midi: N/D
extra features: N/D
global output level control: N/D
global solo level control: N/D
graphic eq andor contour: Equalizzatore grafico a 5 bande
headphone output: N/D
internal amp load for speaker less performance: N/D
maintenance free fixed bias: Sì
number of footswitchable channels or modes: Canale singolo, doppia modalità
number of style modes: 2
power amp details class wattage: Esclusivo amplificatore Simul-Class™ – Offre contemporaneamente i vantaggi della classe A vintage e della classe A/B moderna
power amp tubes: 4 x 6L6
preamp tubes: 5x 12AX7
rectifier tubes: N/D
rectifier type: Diodi al silicio
reverb effects bypass options: Bypass EQ
slave output: Sì
speaker outputs: 1 x 8 Ohm e 2 x 4 Ohm
true bypass options: N/D
tuner output: N/D
types of style modes per channel: Modalità RHYTHM - Pulito tradizionale e gain vintage, Volume 1 indipendente (Gain) con Pull Bright e Master 1 con Pull Deep per impostare il gain iniziale indipendentemente dal volume di esecuzioneModalità LEAD – Gain a cascata (Lead), utilizza il Volume 1 per impostare la potenza del gain iniziale; dotato di Independent Lead Drive (Gain) con Pull Lead (per la selezione manuale del canale) e Lead Master con Pull Deep per regolare il livello del gain a cascata indipendentemente dal volume di esecuzione
variac power switch: N/D
wattages quick reference: 75 o 25 watt (complessivi)
Cabinet features
Cabinet features
cabinet material: Grado marino, Betulla del baltico
casters: N/D
custom finish options: N/D
extra features: N/D
speakers impedance: N/D
standard finish options no extra cost: Vinile Black Bronco, griglia in iuta nera, profili neri, maniglia nera/cromata e angoli in metallo
Accessories
Accessories
footswitch: Due: 1 x footswitch a pulsante singolo (modalità 1/2), 1 x footswitch a due pulsanti (riverbero/EQ)
slip cover: Incluso - Fodera aderente
Weights and dimensions
Weights and dimensions
depth: 10 3/8 D | P 26,23 cm
height: 9 1/4 H | A 23,49 cm
weight: 39 lb | 17,69 kg
width: 18 1/2 W | L 46,35 cm
Model: 2.MCP.V11.G07.P03bod
