Mitch was very helpful with
"Mitch was very helpful with this beautiful guitar."
1969 Gibson Les Paul Custom, Serial Number 559102
Shipped from Kalamazoo on April 3, 1969, this incredibly clean Les Paul™ Custom represents one of the most desirable early iterations of the model’s late-60s return. This example retains the construction features that make early-1969 Customs especially sought after: a one-piece mahogany body with a maple top (no pancake construction), a one-piece mahogany neck, and a 1950s-style long neck tenon. Additional details unique to this short production window include the Gibson headstock logo with no dot over the “I” and the open “b” and “n” lettering.
Finished in ebony nitrocellulose lacquer, the guitar presents beautifully with remarkably little playwear. There are very light nicks and dings along the top edge of the headstock, faint wear near the lower strap button, and minor surface marks consistent with careful handling over time. Gold hardware shows moderate tarnish with plenty of original plating remaining. A small split in the binding on the bass side of the headstock below the low E tuner is present but stable.
The neck features a comfortable Medium D profile measuring 0.89” at the 1st fret and 1.06” at the 12th. The ebony fretboard is a nice, dark example with mother-of-pearl block inlays, and a fantastic inside-the-binding refret by Glaser Instruments. A properly fitted replacement nylon nut was installed during the refret.
Electronics remain original and untouched. The Patent Number humbuckers™ read 7.25k in the neck and 7.22k in the bridge, delivering a smooth, balanced response with excellent clarity and articulation. The pickup covers have never been removed. The wiring harness remains original with CTS® potentiometers and Sprague Black Beauty capacitors. While no full pot codes are visible, the partial codes present (xx76902, 13xxx01, xxx901) date to the first and second weeks of 1969 and are fully consistent with what would be expected for this model.
The original ABR-1 bridge had begun to sink slightly and is included in the case. An aged-to-match Gibson Custom wired ABR-1 with nylon saddles has been installed for proper intonation and stability. The only replaced component is a vintage cream switch tip to replace the missing original. The serial number was factory-stamped at a slight angle but is original and clearly legible.
Weighing 9.81 pounds, the guitar remains solid and well-balanced in the hand. The original black-and-goldenrod rectangle case is included and remains in very good condition, showing a repaired handle on one side and one missing latch. The guitar ships in a Gibson Deluxe Protector Series Les Paul case.
This instrument has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.
Weight: 9.81 lbs.
Neck Depth: 1st fret: .89"; 12th fret: 1.06"
Guitar Specifications
Corps
Corps
Filet Multi-ply binding on body, neck, and headstock
Corps Mahogany
Forme du corps Les Paul
Styles de corps Solidbody
Table Maple
Manche
Manche
Matériau de la touche Ebony fretboard with Mother of Pearl block inlays
Fingerboard Radius 12 in. | 304.8 mm
Nombre de frettes 22
Frettes Medium Jumbo (refret)
Incrustations Mother of Pearl block
Jonction corps/manche Glued (set-neck) construction
Matériau du manche Mahogany
Matériau du sillet de tete Nylon
Largeur du sillet de tete 43.06mm / 1.7in
Profil Medium D
Diapason 628.65mm / 24.75in
Électronique
Électronique
Micro chevalet Patent Number pickup: 7.22k
Les contrôles 2 volume, 2 tone controls with CTS potentiometers and Sprague Black Beauty capacitors
Micro manche Patent Number pickup: 7.25k
Prise de sortie Jack ¼” output jack
Sélecteur de micro 3-way selector switch
Hardware
Hardware
Chevalets Aged Gibson Custom wired ABR-1 bridge with nylon saddles (original in case)
Finition des contrôles Black
Boutons de contrôle Black Witch Hat knobs with gold reflectors
finish Gold
Plaquage sur sortie Jack 3-ply jack plate cover
Entourage Micros Black
Pickguards 5-ply pickguard
Capots Micros Gold
Pièces en plastique Black
Boutons De Sangle Gold
Bouton du sélecteur micros Cream plastic (vintage replacement)
Entourage du sélecteur de micro Black
Cordiers Stop Bar
Mécaniques Kluson® Waffleback tuners with metal Keystone buttons
Divers
Divers
Accessoires Certificate of Authenticity, Letter of Appraisal, new Limited Lifetime Warranty
Model: GCVP0175
Etuis Original black-and-goldenrod rectangle case; ships in Gibson Deluxe Protector Series Les Paul case
Headstock Gibson Open Book headstock
Headstock Inlay Mother of Pearl Gibson logo and split diamond
Taille des cordes 10-46
Gibson Certified Vintage 1969 Gibson Les Paul Custom, Ebony
Gibson Certified Vintage 1969 Gibson Les Paul Custom, Ebony
New Arrival
Certified Vintage
Désolé, la référence Gibson Certified Vintage 1969 Gibson Les Paul Custom, Ebony n’est plus disponible. Nous avons laissé cette page à titre de référence uniquement.
Découvrez les excellentes alternatives sur cette page ou contactez-nous directement pour toute question !
1969 Gibson Les Paul Custom, Serial Number 559102
Shipped from Kalamazoo on April 3, 1969, this incredibly clean Les Paul™ Custom represents one of the most desirable early iterations of the model’s late-60s return. This example retains the construction features that make early-1969 Customs especially sought after: a one-piece mahogany body with a maple top (no pancake construction), a one-piece mahogany neck, and a 1950s-style long neck tenon. Additional details unique to this short production window include the Gibson headstock logo with no dot over the “I” and the open “b” and “n” lettering.
Finished in ebony nitrocellulose lacquer, the guitar presents beautifully with remarkably little playwear. There are very light nicks and dings along the top edge of the headstock, faint wear near the lower strap button, and minor surface marks consistent with careful handling over time. Gold hardware shows moderate tarnish with plenty of original plating remaining. A small split in the binding on the bass side of the headstock below the low E tuner is present but stable.
The neck features a comfortable Medium D profile measuring 0.89” at the 1st fret and 1.06” at the 12th. The ebony fretboard is a nice, dark example with mother-of-pearl block inlays, and a fantastic inside-the-binding refret by Glaser Instruments. A properly fitted replacement nylon nut was installed during the refret.
Electronics remain original and untouched. The Patent Number humbuckers™ read 7.25k in the neck and 7.22k in the bridge, delivering a smooth, balanced response with excellent clarity and articulation. The pickup covers have never been removed. The wiring harness remains original with CTS® potentiometers and Sprague Black Beauty capacitors. While no full pot codes are visible, the partial codes present (xx76902, 13xxx01, xxx901) date to the first and second weeks of 1969 and are fully consistent with what would be expected for this model.
The original ABR-1 bridge had begun to sink slightly and is included in the case. An aged-to-match Gibson Custom wired ABR-1 with nylon saddles has been installed for proper intonation and stability. The only replaced component is a vintage cream switch tip to replace the missing original. The serial number was factory-stamped at a slight angle but is original and clearly legible.
Weighing 9.81 pounds, the guitar remains solid and well-balanced in the hand. The original black-and-goldenrod rectangle case is included and remains in very good condition, showing a repaired handle on one side and one missing latch. The guitar ships in a Gibson Deluxe Protector Series Les Paul case.
This instrument has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.
Weight: 9.81 lbs.
Neck Depth: 1st fret: .89"; 12th fret: 1.06"
Guitar Specifications
Corps
Corps
Filet Multi-ply binding on body, neck, and headstock
Corps Mahogany
Forme du corps Les Paul
Styles de corps Solidbody
Table Maple
Manche
Manche
Matériau de la touche Ebony fretboard with Mother of Pearl block inlays
Fingerboard Radius 12 in. | 304.8 mm
Nombre de frettes 22
Frettes Medium Jumbo (refret)
Incrustations Mother of Pearl block
Jonction corps/manche Glued (set-neck) construction
Matériau du manche Mahogany
Matériau du sillet de tete Nylon
Largeur du sillet de tete 43.06mm / 1.7in
Profil Medium D
Diapason 628.65mm / 24.75in
Électronique
Électronique
Micro chevalet Patent Number pickup: 7.22k
Les contrôles 2 volume, 2 tone controls with CTS potentiometers and Sprague Black Beauty capacitors
Micro manche Patent Number pickup: 7.25k
Prise de sortie Jack ¼” output jack
Sélecteur de micro 3-way selector switch
Hardware
Hardware
Chevalets Aged Gibson Custom wired ABR-1 bridge with nylon saddles (original in case)
Finition des contrôles Black
Boutons de contrôle Black Witch Hat knobs with gold reflectors
finish Gold
Plaquage sur sortie Jack 3-ply jack plate cover
Entourage Micros Black
Pickguards 5-ply pickguard
Capots Micros Gold
Pièces en plastique Black
Boutons De Sangle Gold
Bouton du sélecteur micros Cream plastic (vintage replacement)
Entourage du sélecteur de micro Black
Cordiers Stop Bar
Mécaniques Kluson® Waffleback tuners with metal Keystone buttons
Divers
Divers
Accessoires Certificate of Authenticity, Letter of Appraisal, new Limited Lifetime Warranty
Model: GCVP0175
Etuis Original black-and-goldenrod rectangle case; ships in Gibson Deluxe Protector Series Les Paul case
Headstock Gibson Open Book headstock
Headstock Inlay Mother of Pearl Gibson logo and split diamond
Taille des cordes 10-46
Overall rating: 5.0 / 5 from 1 reviews.
AI Generated Review Summary
Summary topics
Review topics: [].