Gibson

|

Epiphone

|

Kramer

|

Mesa/Boogie

|

KRK

1/14

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Lire moins

Caractéristiques

Corps

Filet 1-ply Body and Neck

Finition du corps Sunburst Nitrocellulose

Corps Laminated Maple

Forme du corps ES-335

Styles de corps ES

Bloc central Maple

Manche

Matériau de la touche Brazilian rosewood

Radius de la touche 304.8mm / 12.0in

Nombre de frettes 22

Frettes Medium (Original)

Incrustations Celluloid Small Block

Jonction corps/manche Glued, Set Neck

Matériau du manche Mahogany

Matériau du sillet de tete Bone (Original)

Largeur du sillet de tete 41.95mm / 1.65in

Profil Medium C

Diapason 628.65mm / 24.75in

Électronique

Micro chevalet Pat No. (7.41k)

Les contrôles 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Micro manche Pat No. (7.40k)

Prise de sortie Jack 1/4"

Sélecteur de micro 3-way selector

Hardware

Chevalets Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Boutons de contrôle Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Entourage Micros Black M-69 Rings

Pickguards 5-ply Black

Capots Micros Chrome Humbucker

Pièces en plastique Black

Matériau du chevalet Nylon

Boutons De Sangle Aluminum

Bouton du sélecteur micros Cream Plastic

Cordiers Chrome Trapeze tailpiece

Tige de réglage Truss Rod Adjustable

Cache Truss Rod Two-ply stepped

Placage des Mécaniques Nickel

Mécaniques Kluson Deluxe double line double ring

Divers

Etuis Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Taille des cordes 10-46

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

New Arrival

Certified Vintage

Désolé, la référence Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst n’est plus disponible. Nous avons laissé cette page à titre de référence uniquement.

Découvrez les excellentes alternatives sur cette page ou contactez-nous directement pour toute question !

Produits similaires Découvrir Gibson Certified Vintage Nouveautés Nous contacter

Afficher tous les détails

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Lire moins

Caractéristiques

Corps

Filet 1-ply Body and Neck

Finition du corps Sunburst Nitrocellulose

Corps Laminated Maple

Forme du corps ES-335

Styles de corps ES

Bloc central Maple

Manche

Matériau de la touche Brazilian rosewood

Radius de la touche 304.8mm / 12.0in

Nombre de frettes 22

Frettes Medium (Original)

Incrustations Celluloid Small Block

Jonction corps/manche Glued, Set Neck

Matériau du manche Mahogany

Matériau du sillet de tete Bone (Original)

Largeur du sillet de tete 41.95mm / 1.65in

Profil Medium C

Diapason 628.65mm / 24.75in

Électronique

Micro chevalet Pat No. (7.41k)

Les contrôles 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Micro manche Pat No. (7.40k)

Prise de sortie Jack 1/4"

Sélecteur de micro 3-way selector

Hardware

Chevalets Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Boutons de contrôle Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Entourage Micros Black M-69 Rings

Pickguards 5-ply Black

Capots Micros Chrome Humbucker

Pièces en plastique Black

Matériau du chevalet Nylon

Boutons De Sangle Aluminum

Bouton du sélecteur micros Cream Plastic

Cordiers Chrome Trapeze tailpiece

Tige de réglage Truss Rod Adjustable

Cache Truss Rod Two-ply stepped

Placage des Mécaniques Nickel

Mécaniques Kluson Deluxe double line double ring

Divers

Etuis Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Taille des cordes 10-46

WARNING:This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.