Pure Vintage Boogie – The Legendary Mark IIC+ Returns
Set yourself apart with this Custom Configured version of the Mark IIC+ Head, customized with eye-grabbing Emerald Bronco vinyl that is paired with a Wicker grille and accented with tan piping, a heavy-duty tan handle, and tan leather corners. This is the only way to get a Mark IIC+ Head in Emerald Bronco, so order yours today while they’re still available.
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the third generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the Pull Shift voicing features – some mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their center points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The rear panel of the C+ provides the important features that keep this amp as relevant as ever, 40 years after its initial run. Global Presence and Reverb controls are centered for easy navigation from the front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left, from the front) allows for your choice of the full 75 watts of “Simul-Class” power for richness, authority, and max headroom or “Class A” for 25 watts of reduced power and low end, along with easier, smoother power clip at lower volumes. One 8 ohm and two 4 ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated direct output for consoles or interfaces, a Slave tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide compliance regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic tone and the passionate faithful who’ve made it mythical.
Key Features:
- Custom Configured in Emerald Bronco vinyl with a Wicker grille
- An authentic recreation of the legendary MESA/Boogie Mark IIC+ Head
- Footswitchable Dual Mode preamp
- Selectable Simul-Class (75 watts) or Class A (25 watts) power
- Built-in footswitchable tube-driven Spring Reverb
- Footswitchable 5-Band Graphic EQ
- Slave Output for use with wet/dry/wet rigs and external IR readers
- Series, buffered Effects Loop
Specifications
Quick overview
Quick overview
available formats: Topteil und 1x12 Combo
channels modes: Einkanal-/Dualmodus (RHYTHM & LEAD)
dimensions: 9 1/4 Zoll H X 18 3/4 Zoll B X 10 3/8 Zoll T 23,49 cm H X 47,62 cm B X 26,23 cm T
Foot Switchable Functions: Modi, EQ, Hall
graphic eq reverb fx solo: FX-Loop/5-Band Grafik-EQ/Hall
Mode Voicings Styles: RHYTHM – Traditionell von Clean bis Vintage Gain, unabhängige Lautstärke 1 (Gain) mit Pull Bright und Master 1 mit Pull Deep-Reglern zur Einstellung der anfänglichen Verstärkung unabhängig von der Spiellautstärke. LEAD-Modus – Kaskadierende High-Gain (Lead), verwendet Lautstärke 1 zur Einstellung der anfänglichen Verstärkungsstärke und verfügt dann über Independent Lead Drive (Gain) mit Pull Lead (zur manuellen Kanalumschaltung) und Lead Master mit Pull Deep-Reglern zur Einstellung der kaskadierenden Verstärkung unabhängig von der Spiellautstärke
power tube type: 4x Mesa 6L6 Endstufenröhren
speakers impedance: N/A
wattage: 75 oder 25 Watt (Global)
weight: 17,69 kg (39 Pfund)
Features
Features
amp type: Röhre
bias switch for alternate power tubes types: N/A
built in power amp attenuation: N/A
cabinet simulation direct liverecording output: N/A
channel controls: RHYTHM/LEAD Gemeinsame Steuerung: Lautstärke 1 (regelt die anfängliche Verstärkung für beide Kanäle), Höhen, Bässe, Mitten, zuweisbarer/fußschaltbarer 5-Band Grafik-EQ, Hall und Präsenz
chassis material: Stahl
convection or fan cooling: Ventilatorkühlung
effects loop bypass options: Röhrengetriebener, serienmäßiger Effektloop
external switching jack options andor midi: N/A
extra features: N/A
global output level control: N/A
global solo level control: N/A
graphic eq andor contour: 5-Band Grafik-EQ
headphone output: N/A
internal amp load for speaker less performance: N/A
maintenance free fixed bias: Ja
number of footswitchable channels or modes: Einkanal, Dualmodus
number of style modes: 2
power amp details class wattage: Exklusive Simul-Class™ Power Endstufe – bietet die Vorteile von gleichzeitigem Betrieb von Vintage-Class A und modernem Class A/B
power amp tubes: 4x 6L6
preamp tubes: 5x 12AX7
rectifier tubes: N/A
rectifier type: Siliziumdioden
reverb effects bypass options: EQ-Bypass
slave output: Ja
speaker outputs: 1x 8 Ohm und 2x 4 Ohm
true bypass options: N/A
tuner output: N/A
types of style modes per channel: RHYTHM-Modus – Traditionell von Clean bis Vintage Gain, unabhängige Lautstärke 1 (Gain) mit Pull Bright und Master 1 mit Pull Deep-Reglern zur Einstellung der anfänglichen Verstärkung unabhängig von der Spiellautstärke. LEAD-Modus – Kaskadierende High-Gain (Lead), verwendet Lautstärke 1 zur Einstellung der anfänglichen Verstärkungsstärke und verfügt dann über Independent Lead Drive (Gain) mit Pull Lead (zur manuellen Kanalumschaltung) und Lead Master mit Pull Deep-Reglern zur Einstellung der kaskadierenden Verstärkung unabhängig von der Spiellautstärke
variac power switch: N/A
wattages quick reference: 75 oder 25 Watt (Global)
Cabinet features
Cabinet features
cabinet material: Marinequalität, baltische Birke
casters: N/A
custom finish options: N/A
extra features: N/A
speakers impedance: N/A
standard finish options no extra cost: Schwarzes Bronco-Vinyl, schwarzes Gitter aus Jute, schwarze Paspelierung, schwarz/verchromter Griff und Metallecken
Accessories
Accessories
footswitch: Zwei: 1x Ein-Tasten-Fußschalter (Modi 1/2), 1x Zwei-Tasten-Fußschalter (Hall/EQ)
slip cover: Inklusive – Angepasster Schutzbezug
Weights and dimensions
Weights and dimensions
depth: 26.23 cm T (10 3/8 Zoll) T
height: 23,49 cm H (9 1/4 Zoll) H
weight: 17,69 kg (39 Pfund)
width: 46,35 cm B (18 1/2 Zoll) B
Model: 2.MCP.V11.G07.P03bod
Mesa/Boogie Custom Configured Mark IIC+ Head, Emerald Bronco
Mesa/Boogie Custom Configured Mark IIC+ Head, Emerald Bronco
Kostenloser & Schneller Versand
Kostenloser & Schneller Versand
Bestellungen, die montags bis freitags vor 13:00 Uhr aufgegeben werden, werden noch am selben Tag bearbeitet. Bestellungen nach dieser Zeit werden am nächsten Werktag versendet. Alle Bestellungen über 50 € erhalten kostenlosen Standardversand.
Begrenzte Garantie
Begrenzte Garantie
Kaufen und spielen Sie mit Vertrauen, denn Ihr Verstärker ist durch unsere 5-jährige begrenzte Garantie geschützt. Hier erfahren Sie mehr über Garantien und Ausschlüsse.
Handverdrahtet in Kalifornien
Handverdrahtet in Kalifornien
Jeder MESA/Boogie-Verstärker wird seit über 45 Jahren im gleichen Werk in Petaluma, Kalifornien, von Hand verdrahtet.
Individuell Konfigurierte Optionen Verfügbar
Individuell Konfigurierte Optionen Verfügbar
Rufen Sie uns in der Gibson Garage London an, um Ihren individuell konfigurierten Verstärker zu erstellen. +44 20 4570 5400
Drei Kostenlose Monate der Gibson App
Drei Kostenlose Monate der Gibson App
Nur für kurze Zeit: Erhalten Sie ein dreimonatiges Abonnement der Gibson App kostenlos beim Kauf dieses Produkts. Klicken Sie hier, um mehr über die Gibson App zu erfahren.
Pure Vintage Boogie – The Legendary Mark IIC+ Returns
Set yourself apart with this Custom Configured version of the Mark IIC+ Head, customized with eye-grabbing Emerald Bronco vinyl that is paired with a Wicker grille and accented with tan piping, a heavy-duty tan handle, and tan leather corners. This is the only way to get a Mark IIC+ Head in Emerald Bronco, so order yours today while they’re still available.
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the third generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the Pull Shift voicing features – some mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their center points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The rear panel of the C+ provides the important features that keep this amp as relevant as ever, 40 years after its initial run. Global Presence and Reverb controls are centered for easy navigation from the front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left, from the front) allows for your choice of the full 75 watts of “Simul-Class” power for richness, authority, and max headroom or “Class A” for 25 watts of reduced power and low end, along with easier, smoother power clip at lower volumes. One 8 ohm and two 4 ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated direct output for consoles or interfaces, a Slave tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide compliance regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic tone and the passionate faithful who’ve made it mythical.
Key Features:
- Custom Configured in Emerald Bronco vinyl with a Wicker grille
- An authentic recreation of the legendary MESA/Boogie Mark IIC+ Head
- Footswitchable Dual Mode preamp
- Selectable Simul-Class (75 watts) or Class A (25 watts) power
- Built-in footswitchable tube-driven Spring Reverb
- Footswitchable 5-Band Graphic EQ
- Slave Output for use with wet/dry/wet rigs and external IR readers
- Series, buffered Effects Loop
Specifications
Quick overview
Quick overview
available formats: Topteil und 1x12 Combo
channels modes: Einkanal-/Dualmodus (RHYTHM & LEAD)
dimensions: 9 1/4 Zoll H X 18 3/4 Zoll B X 10 3/8 Zoll T 23,49 cm H X 47,62 cm B X 26,23 cm T
Foot Switchable Functions: Modi, EQ, Hall
graphic eq reverb fx solo: FX-Loop/5-Band Grafik-EQ/Hall
Mode Voicings Styles: RHYTHM – Traditionell von Clean bis Vintage Gain, unabhängige Lautstärke 1 (Gain) mit Pull Bright und Master 1 mit Pull Deep-Reglern zur Einstellung der anfänglichen Verstärkung unabhängig von der Spiellautstärke. LEAD-Modus – Kaskadierende High-Gain (Lead), verwendet Lautstärke 1 zur Einstellung der anfänglichen Verstärkungsstärke und verfügt dann über Independent Lead Drive (Gain) mit Pull Lead (zur manuellen Kanalumschaltung) und Lead Master mit Pull Deep-Reglern zur Einstellung der kaskadierenden Verstärkung unabhängig von der Spiellautstärke
power tube type: 4x Mesa 6L6 Endstufenröhren
speakers impedance: N/A
wattage: 75 oder 25 Watt (Global)
weight: 17,69 kg (39 Pfund)
Features
Features
amp type: Röhre
bias switch for alternate power tubes types: N/A
built in power amp attenuation: N/A
cabinet simulation direct liverecording output: N/A
channel controls: RHYTHM/LEAD Gemeinsame Steuerung: Lautstärke 1 (regelt die anfängliche Verstärkung für beide Kanäle), Höhen, Bässe, Mitten, zuweisbarer/fußschaltbarer 5-Band Grafik-EQ, Hall und Präsenz
chassis material: Stahl
convection or fan cooling: Ventilatorkühlung
effects loop bypass options: Röhrengetriebener, serienmäßiger Effektloop
external switching jack options andor midi: N/A
extra features: N/A
global output level control: N/A
global solo level control: N/A
graphic eq andor contour: 5-Band Grafik-EQ
headphone output: N/A
internal amp load for speaker less performance: N/A
maintenance free fixed bias: Ja
number of footswitchable channels or modes: Einkanal, Dualmodus
number of style modes: 2
power amp details class wattage: Exklusive Simul-Class™ Power Endstufe – bietet die Vorteile von gleichzeitigem Betrieb von Vintage-Class A und modernem Class A/B
power amp tubes: 4x 6L6
preamp tubes: 5x 12AX7
rectifier tubes: N/A
rectifier type: Siliziumdioden
reverb effects bypass options: EQ-Bypass
slave output: Ja
speaker outputs: 1x 8 Ohm und 2x 4 Ohm
true bypass options: N/A
tuner output: N/A
types of style modes per channel: RHYTHM-Modus – Traditionell von Clean bis Vintage Gain, unabhängige Lautstärke 1 (Gain) mit Pull Bright und Master 1 mit Pull Deep-Reglern zur Einstellung der anfänglichen Verstärkung unabhängig von der Spiellautstärke. LEAD-Modus – Kaskadierende High-Gain (Lead), verwendet Lautstärke 1 zur Einstellung der anfänglichen Verstärkungsstärke und verfügt dann über Independent Lead Drive (Gain) mit Pull Lead (zur manuellen Kanalumschaltung) und Lead Master mit Pull Deep-Reglern zur Einstellung der kaskadierenden Verstärkung unabhängig von der Spiellautstärke
variac power switch: N/A
wattages quick reference: 75 oder 25 Watt (Global)
Cabinet features
Cabinet features
cabinet material: Marinequalität, baltische Birke
casters: N/A
custom finish options: N/A
extra features: N/A
speakers impedance: N/A
standard finish options no extra cost: Schwarzes Bronco-Vinyl, schwarzes Gitter aus Jute, schwarze Paspelierung, schwarz/verchromter Griff und Metallecken
Accessories
Accessories
footswitch: Zwei: 1x Ein-Tasten-Fußschalter (Modi 1/2), 1x Zwei-Tasten-Fußschalter (Hall/EQ)
slip cover: Inklusive – Angepasster Schutzbezug
Weights and dimensions
Weights and dimensions
depth: 26.23 cm T (10 3/8 Zoll) T
height: 23,49 cm H (9 1/4 Zoll) H
weight: 17,69 kg (39 Pfund)
width: 46,35 cm B (18 1/2 Zoll) B
Model: 2.MCP.V11.G07.P03bod
