The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
Head-Track Head & FX Loop Switcher
Head-Track Head & FX Loop Switcher
Limitierte Garantie
Limitierte Garantie
Sorgenfrei einkaufen und spielen mit dem Schutz der eingeschränkten 5-Jahres-Garantie. Weitere Informationen zu Garantien und Ausnahmen finden Sie hier .
Handverlötet in Kalifornien
Handverlötet in Kalifornien
Jeder MESA/Boogie-Verstärker wird seit über 45 Jahren in derselben Anlage in Petaluma, Kalifornien, handverlötet.
Drei Kostenlose Monate der Gibson App
Drei Kostenlose Monate der Gibson App
Nur für kurze Zeit: Erhalten Sie ein dreimonatiges Abonnement der Gibson App kostenlos beim Kauf dieses Produkts. Klicken Sie hier, um mehr über die Gibson App zu erfahren.
The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
