Pure vintage Boogie – The legendary Mark IIC+ returns
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the 3rd generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the PULL SHIFT voicing features – some Mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their Center Points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The Rear Panel of the C+ provides the important features that keep this amp as relevant as ever 40 years after its initial run. Global PRESENCE and REVERB controls are centered for easy navigation from the Front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left from the Front) allows for your choice of the full 75 watts of “SIMUL-CLASS” power for richness, authority, and max headroom or “CLASS A” for 25 watts of reduced power and low end along with easier, smoother power clip at lower volumes. One 8 Ohm and two 4 Ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated Direct Output for Consoles or Interfaces, a SLAVE tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR Readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide Compliance Regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced Tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic Tone and the passionate faithful who’ve made it mythical.
Key Features:
An authentic recreation of the legendary MESA/Boogie Mark IIC+ 1x12 Combo
Footswitchable Dual Mode Preamp
Selectable Simul-Class (75 Watts) or Class A (25 Watts) Power
Built-in Tube-Driven Spring Reverb
5-Band Graphic EQ
Slave Output for use with Wet/Dry/Wet rigs and external IR readers
Series, Buffered Effects Loop
12" Celestion C90 Speaker
Specifications
Quick overview
Quick overview
available formats: Head & 1x12 Combo
channels modes: Single Channel/Dual Mode (RHYTHM & LEAD)
dimensions: 18 1/4 H X 18 3/4 W X 11 1/4 D 46.35 cm H X 47.62 cm W X 28.57 cm D
Foot Switchable Functions: Modes, EQ, Reverb
graphic eq reverb fx solo: FX Loop/5 Band Graphic EQ/Reverb
Mode Voicings Styles: RHYTHM - Traditional Clean to Vintage Gain, Independent Volume 1 (Gain) with Pull Bright & Master 1 with Pull Deep Controls to set initial gain independent of playing volume LEAD – Cascading High-Gain (Lead), Utilizes Volume 1 to set initial gain strength then features Independent Lead Drive (Gain) with Pull Lead (to manually channel switch) & Lead Master with Pull Deep Controls to adjust the level of cascading gain independent of the playing volume
power tube type: 4x Mesa 6L6 Power Tubes
speakers impedance: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms
wattage: 75 or 25 Watts (Global)
weight: 59 lbs | 26.76 kg
Features
Features
amp type: Tube
channel controls: RHYTHM/LEAD Shared Controls: Volume 1 (sets initial gain strength for both channels), Treble, Bass, Middle, Assignable/Foot-Switchable 5-Band Graphic EQ, Reverb & Presence
chassis material: Steel
convection or fan cooling: Fan Cooling
effects loop bypass options: Tube-Driven, Series FX Loop
graphic eq andor contour: 5-Band Graphic EQ
maintenance free fixed bias: Yes
number of footswitchable channels or modes: Single Channel, Dual Mode
number of style modes: 2
power amp details class wattage: Exclusive Simul-Class™ Power Amp – Provides the benefits of vintage Class-A and modern Class A/B running simultaneously
power amp tubes: 4x 6L6
preamp tubes: 5x 12AX7
rectifier type: Silicon Diodes
reverb effects bypass options: EQ Bypass
slave output: Yes
speaker outputs: 1x 8 Ohm and 2x 4 Ohm
types of style modes per channel: RHYTHM Mode - Traditional Clean to Vintage Gain, Independent Volume 1 (Gain) with Pull Bright & Master 1 with Pull Deep Controls to set initial gain independent of playing volume LEAD Mode – Cascading High-Gain (Lead), Utilizes Volume 1 to set initial gain strength then features Independent Lead Drive (Gain) with Pull Lead (to manually channel switch) & Lead Master with Pull Deep Controls to adjust the level of cascading gain independent of the playing volume
wattages quick reference: 75 or 25 Watts (Global)
Cabinet features
Cabinet features
cabinet material: Marine Grade, Baltic Birch
casters: Yes
speakers impedance: 1 - 8 Ohm Celestion C90 / Total Load = 8 Ohms
standard finish options no extra cost: Black Bronco Vinyl, Black Nylon Grille, Black Rubber Handle with Chrome End Caps & Metal Corners
Accessories
Accessories
footswitch: Two: 1x Single-Button Footswitch (Modes 1/2), 1x Two-Button Footswitch (Reverb/EQ)
slip cover: Included - Fitted Slipcover
Weights and dimensions
Weights and dimensions
depth: 10 3/8 D | 26.23 cm
height: 17 1/4 | 43.81 cm
weight: 59 lbs | 26.76 kg
width: 18 1/2 W | 46.35 cm
Model: 1.MCPX.EU.AB.CO
Mesa/Boogie Mark IIC+ 1x12 Combo, EU Voltage
Mesa/Boogie Mark IIC+ 1x12 Combo, EU Voltage
Custom Configured Options Available
Custom Configured Options Available
Give us a call at the Gibson Garage Nashville to build your Custom Configured amplifier. 1-615-933-6000
Limited Warranty
Limited Warranty
Shop and play with confidence knowing that your amplifier is protected by our limited 5-year warranty. Learn more about warranties and exclusions here .
Hand-wired in California
Hand-wired in California
Every MESA/Boogie amplifier has been hand-wired in the same Petaluma, California, facility for more than 45 years.
Three Free Months of the Gibson App
Three Free Months of the Gibson App
For a limited time only, receive a three-month subscription to the Gibson App for free with the purchase of this product. Click here to learn more about the Gibson App.
Pure vintage Boogie – The legendary Mark IIC+ returns
The Mark IIC+ is pure “vintage Boogie®” and based on the original Mark II (now called the Mark II-A) design, the world’s first “Dual Mode” amplifier containing independent performance modes dedicated to clean and overdrive sounds. The IIC+ model represents the 3rd generation of that game-changing single channel/dual mode layout and includes all the refinements made to that original format over its nearly five influential years. It was also the last model in its family, as the subsequent model would contain three performance modes and be dubbed the MARK III.
The IIC+’s single row of controls is shared by its two modes (preamps), one for Rhythm (clean) and one for Lead (overdrive). Independent, though still interactive, sets of gain and volume controls help optimize each gain structure while shared Tone controls handle the broad stroke voicing. Fine-tuning of the sounds is accomplished by the PULL SHIFT voicing features – some Mode specific – fitted to the simple controls and further shaping via the on-board 5-Band Graphic EQ. Though the “Q” of the individual Bands (Slider Pot frequencies) is fairly wide around their Center Points, they provide a surprising degree of surgical-level sculpting quickly and musically.
The Rear Panel of the C+ provides the important features that keep this amp as relevant as ever 40 years after its initial run. Global PRESENCE and REVERB controls are centered for easy navigation from the Front in stage environments. A series, buffered Effects Loop provides a seamless interface for your time-based processing. The Power Select switch at the far right (left from the Front) allows for your choice of the full 75 watts of “SIMUL-CLASS” power for richness, authority, and max headroom or “CLASS A” for 25 watts of reduced power and low end along with easier, smoother power clip at lower volumes. One 8 Ohm and two 4 Ohm Speaker Outputs provide for a wide array of cabinet impedance matching. And though not a compensated Direct Output for Consoles or Interfaces, a SLAVE tap off the speaker outputs captures the entire sound of the amp – preamp and power section – to produce a non-compensated feed for IR Readers or external processors that might even serve an era-appropriate “dry/wet/wet” rig.
Out of production for four decades, we welcome back this icon and celebrate its impact on the incredible guitar heroes and timeless recordings they made during one of rock guitar’s biggest decades. The Mark IIC+ legacy is one we don’t take lightly or for granted, and recreating it in today’s world with today’s available components and rigorous worldwide Compliance Regulations was no easy feat. However, we are just as proud and excited about this iteration as we were about the first one that was produced for less than two years, four decades ago.
If you seek to own a legend, don’t want to chase vintage relics in who knows what condition, want the fieriest, most articulate, and nuanced Tone possible, don’t really need the galaxy-wide versatility of our Mark VII, and prefer a more classic layout and look, the Mark IIC+ is waiting. Be warned, though, once you play a C+, you may never feel the same about other guitar amplifiers. A bold statement, to be sure, but it’s backed up by 40 years of iconic Tone and the passionate faithful who’ve made it mythical.
Key Features:
An authentic recreation of the legendary MESA/Boogie Mark IIC+ 1x12 Combo
Footswitchable Dual Mode Preamp
Selectable Simul-Class (75 Watts) or Class A (25 Watts) Power
Built-in Tube-Driven Spring Reverb
5-Band Graphic EQ
Slave Output for use with Wet/Dry/Wet rigs and external IR readers
Series, Buffered Effects Loop
12" Celestion C90 Speaker
Specifications
Quick overview
Quick overview
available formats: Head & 1x12 Combo
channels modes: Single Channel/Dual Mode (RHYTHM & LEAD)
dimensions: 18 1/4 H X 18 3/4 W X 11 1/4 D 46.35 cm H X 47.62 cm W X 28.57 cm D
Foot Switchable Functions: Modes, EQ, Reverb
graphic eq reverb fx solo: FX Loop/5 Band Graphic EQ/Reverb
Mode Voicings Styles: RHYTHM - Traditional Clean to Vintage Gain, Independent Volume 1 (Gain) with Pull Bright & Master 1 with Pull Deep Controls to set initial gain independent of playing volume LEAD – Cascading High-Gain (Lead), Utilizes Volume 1 to set initial gain strength then features Independent Lead Drive (Gain) with Pull Lead (to manually channel switch) & Lead Master with Pull Deep Controls to adjust the level of cascading gain independent of the playing volume
power tube type: 4x Mesa 6L6 Power Tubes
speakers impedance: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms
wattage: 75 or 25 Watts (Global)
weight: 59 lbs | 26.76 kg
Features
Features
amp type: Tube
channel controls: RHYTHM/LEAD Shared Controls: Volume 1 (sets initial gain strength for both channels), Treble, Bass, Middle, Assignable/Foot-Switchable 5-Band Graphic EQ, Reverb & Presence
chassis material: Steel
convection or fan cooling: Fan Cooling
effects loop bypass options: Tube-Driven, Series FX Loop
graphic eq andor contour: 5-Band Graphic EQ
maintenance free fixed bias: Yes
number of footswitchable channels or modes: Single Channel, Dual Mode
number of style modes: 2
power amp details class wattage: Exclusive Simul-Class™ Power Amp – Provides the benefits of vintage Class-A and modern Class A/B running simultaneously
power amp tubes: 4x 6L6
preamp tubes: 5x 12AX7
rectifier type: Silicon Diodes
reverb effects bypass options: EQ Bypass
slave output: Yes
speaker outputs: 1x 8 Ohm and 2x 4 Ohm
types of style modes per channel: RHYTHM Mode - Traditional Clean to Vintage Gain, Independent Volume 1 (Gain) with Pull Bright & Master 1 with Pull Deep Controls to set initial gain independent of playing volume LEAD Mode – Cascading High-Gain (Lead), Utilizes Volume 1 to set initial gain strength then features Independent Lead Drive (Gain) with Pull Lead (to manually channel switch) & Lead Master with Pull Deep Controls to adjust the level of cascading gain independent of the playing volume
wattages quick reference: 75 or 25 Watts (Global)
Cabinet features
Cabinet features
cabinet material: Marine Grade, Baltic Birch
casters: Yes
speakers impedance: 1 - 8 Ohm Celestion C90 / Total Load = 8 Ohms
standard finish options no extra cost: Black Bronco Vinyl, Black Nylon Grille, Black Rubber Handle with Chrome End Caps & Metal Corners
Accessories
Accessories
footswitch: Two: 1x Single-Button Footswitch (Modes 1/2), 1x Two-Button Footswitch (Reverb/EQ)
slip cover: Included - Fitted Slipcover
Weights and dimensions
Weights and dimensions
depth: 10 3/8 D | 26.23 cm
height: 17 1/4 | 43.81 cm
weight: 59 lbs | 26.76 kg
width: 18 1/2 W | 46.35 cm
Model: 1.MCPX.EU.AB.CO
