Painted Over Goldtop 1957 Les Paul Standard Reissue
This Gibson Custom Select 1957 Les Paul™ Standard Reissue is finished in a very special way that is rare on any Gibson Custom product. Gibson Custom Select offers highly customized instruments with handpicked features chosen by Gibson’s experts. These guitars are made in small batches by the skilled artisans at Gibson Custom. Special features can include custom finishes, hand-selected electronics, and unique hardware specifications. This Gibson Custom Select 1957 Les Paul Standard Reissue features several customizations, including a “painted over” Goldtop finish, a push-pull control for coil-splitting the neck pickup, a 1960 Slim Taper V2 neck profile, and Murphy Lab Ultra Heavy Aging.
In 1957, the Les Paul Standard underwent quite a transformation. With the introduction of the humbucker™ pickup, Gibson added these new hum-canceling pickups to the Les Paul Standard, which had previously featured a Goldtop finish with P-90 pickups. This hum-canceling technology helped eliminate 60-cycle hum, making recordings clearer. Later on, these pickups made overdriven amps less noisy when the guitar was not being played. The construction remained the same as the previous year, featuring a solid mahogany body with a two-piece maple cap, a solid mahogany neck with a solid rosewood fretboard, and a Stop Bar tailpiece with an ABR-1 bridge.
This Gibson Custom Select 1957 Les Paul Standard Reissue is available in three “painted over” finishes, including Ebony over Goldtop, Pelham Blue over Goldtop, and Inverness Green and Pelham Blue over Goldtop. The Inverness Green and Pelham Blue over Goldtop finish simulates the top layer of nitrocellulose lacquer aging to a yellow hue while the back remains intact, giving the guitar a two-tone finish. Each of these guitars features the original Goldtop finish underneath the solid colors on top and includes a natural finish on the back and neck. The Murphy Lab Ultra Heavy Aging reveals the Gold finish on the top.
The neck profile has been modified to a 1960 SlimTaper™ V2, as if the neck was sanded down during the guitar refinishing. A push-pull potentiometer was added to the volume control on the neck pickup for coil splitting. This option adds a bell-like timbre to the neck pickup but can also be activated while playing in the middle position. This kind of modification, featuring push-pull potentiometers on a Historic reissue, can only be found through Gibson Custom Select and Made to Measure.
Featuring custom “painted over” finishes, a 1960 SlimTaper V2 neck profile, and a push-pull control for coil splitting the neck pickup, this Gibson Custom Select 1957 Les Paul Standard Reissue has custom modifications hand-selected by Gibson’s experts. This guitar may look like a modified Les Paul Standard from the 1950s, but it has modifications that are perfect for today’s player who prefers a slimmer neck and more tonal options. Included with this guitar is a Gibson Custom Certificate of Authenticity and a reissue hardshell case.
Highlights
- 1960 SlimTaper V2 neck profile
- Painted Over Goldtop finish
- Split Coil neck pickup
- Murphy Lab Ultra Heavy Aged
Specifications
Body Specs
Body Specs
Back 1-Piece Lightweight Mahogany
Binding Single-ply Royalite
Body Finish Murphy Lab Aged Nitrocellulose Lacquer
Body Shape Les Paul
Body Styles Les Paul,Single Cut
single-cut
Top 2-Piece Plain Maple, Hide Glue Fit
Weight Relief None
Neck Specs
Neck Specs
End Of Board Width 56.89mm / 2.24in
Fingerboard Material Indian Rosewood
Fingerboard Radius 304.8mm / 12.0in
Fret Count 22
Frets Historic Gibson Narrow/Tall
Inlays Aged Cellulose Nitrate Trapezoid
Joint Long Tenon, Hide Glue Fit
Neck Material Solid Mahogany
Nut Material Nylon
Nut Width 42.85mm / 1.69in
Profile 1960 SlimTaper V2 C
Scale Length 628.65mm / 24.75in
Electronics Specs
Electronics Specs
Bridge Pickup Custombucker Alnico 3
Controls 2 Volume, 2 Tone, Pull-Pull Coil-Split Neck Pickup
Neck Pickup Custombucker Alnico 3
Output Jack 1/4" Switchcraft
Pickup Selector 3-Way Switchcraft
Hardware Specs
Hardware Specs
Bridge ABR-1
Control Covers Brown Royalite
Control Knobs Butyrate Gold Top Hats
finish Nickel; Murphy Lab Heavy Aged
Jack Plate Cover Laminated Cellulose Acetate Butyrate
Mounting Rings M69 Cellulose Acetate Butyrate
Pickguard Laminated Cellulose Acetate Butyrate
Pickup Covers Authentic Profile Nickel Silver
Strap Buttons Aluminum
Switch Tip Amber Catalin
Switchwasher Replica Cellulose Acetate Butyrate
Tailpiece Lightweight Aluminum Stop Bar
Truss Rod Authentic 1950s No-Tube
Truss Rod Cover Authentic Stepped 2-Ply
Tuner Plating Nickel
Tuning Machines Kluson Single Line, Single Ring
Misc Specs
Misc Specs
Accessories Certificate of Authenticity
Model: LPR57PSL000000294
Case Lifton Reissue 5-Latch Case
Headstock Inlay Gibson logo in Mother of Pearl, Les Paul Model silkscreen
Strings Gauge .010, .013, .017, .026, .036, .046
Gibson Custom 1957 Les Paul Standard Reissue, Ultra Heavy Aged, Pelham Blue Over Goldtop
Gibson Custom 1957 Les Paul Standard Reissue, Ultra Heavy Aged, Pelham Blue Over Goldtop
Free & Fast Shipping
Free & Fast Shipping
Orders placed by noon CST Monday-Friday (excluding holidays) will ship the same day. Orders placed after this cutoff will ship the next business day. All orders over $100 receive free ground shipping within the United States.
Lifetime Warranty
Lifetime Warranty
Shop and play with confidence knowing that your instrument is protected by our limited lifetime warranty. Learn more about warranties and exclusions here .
Case Included
Case Included
Your instrument ships with a factory-supplied hard- or soft-shell case for safe storage and transportation. Please refer to the product specifications for details.
Setup Included
Setup Included
Our craftory-trained technicians perform a final thorough inspection and detailed setup moments before your instrument is packed and shipped to you.
Three Free Months of the Gibson App
Three Free Months of the Gibson App
For a limited time only, receive a three-month subscription to the Gibson App for free with the purchase of this product. Click here to learn more about the Gibson App.
Painted Over Goldtop 1957 Les Paul Standard Reissue
This Gibson Custom Select 1957 Les Paul™ Standard Reissue is finished in a very special way that is rare on any Gibson Custom product. Gibson Custom Select offers highly customized instruments with handpicked features chosen by Gibson’s experts. These guitars are made in small batches by the skilled artisans at Gibson Custom. Special features can include custom finishes, hand-selected electronics, and unique hardware specifications. This Gibson Custom Select 1957 Les Paul Standard Reissue features several customizations, including a “painted over” Goldtop finish, a push-pull control for coil-splitting the neck pickup, a 1960 Slim Taper V2 neck profile, and Murphy Lab Ultra Heavy Aging.
In 1957, the Les Paul Standard underwent quite a transformation. With the introduction of the humbucker™ pickup, Gibson added these new hum-canceling pickups to the Les Paul Standard, which had previously featured a Goldtop finish with P-90 pickups. This hum-canceling technology helped eliminate 60-cycle hum, making recordings clearer. Later on, these pickups made overdriven amps less noisy when the guitar was not being played. The construction remained the same as the previous year, featuring a solid mahogany body with a two-piece maple cap, a solid mahogany neck with a solid rosewood fretboard, and a Stop Bar tailpiece with an ABR-1 bridge.
This Gibson Custom Select 1957 Les Paul Standard Reissue is available in three “painted over” finishes, including Ebony over Goldtop, Pelham Blue over Goldtop, and Inverness Green and Pelham Blue over Goldtop. The Inverness Green and Pelham Blue over Goldtop finish simulates the top layer of nitrocellulose lacquer aging to a yellow hue while the back remains intact, giving the guitar a two-tone finish. Each of these guitars features the original Goldtop finish underneath the solid colors on top and includes a natural finish on the back and neck. The Murphy Lab Ultra Heavy Aging reveals the Gold finish on the top.
The neck profile has been modified to a 1960 SlimTaper™ V2, as if the neck was sanded down during the guitar refinishing. A push-pull potentiometer was added to the volume control on the neck pickup for coil splitting. This option adds a bell-like timbre to the neck pickup but can also be activated while playing in the middle position. This kind of modification, featuring push-pull potentiometers on a Historic reissue, can only be found through Gibson Custom Select and Made to Measure.
Featuring custom “painted over” finishes, a 1960 SlimTaper V2 neck profile, and a push-pull control for coil splitting the neck pickup, this Gibson Custom Select 1957 Les Paul Standard Reissue has custom modifications hand-selected by Gibson’s experts. This guitar may look like a modified Les Paul Standard from the 1950s, but it has modifications that are perfect for today’s player who prefers a slimmer neck and more tonal options. Included with this guitar is a Gibson Custom Certificate of Authenticity and a reissue hardshell case.
Highlights
- 1960 SlimTaper V2 neck profile
- Painted Over Goldtop finish
- Split Coil neck pickup
- Murphy Lab Ultra Heavy Aged
Specifications
Body Specs
Body Specs
Back 1-Piece Lightweight Mahogany
Binding Single-ply Royalite
Body Finish Murphy Lab Aged Nitrocellulose Lacquer
Body Shape Les Paul
Body Styles Les Paul,Single Cut
single-cut
Top 2-Piece Plain Maple, Hide Glue Fit
Weight Relief None
Neck Specs
Neck Specs
End Of Board Width 56.89mm / 2.24in
Fingerboard Material Indian Rosewood
Fingerboard Radius 304.8mm / 12.0in
Fret Count 22
Frets Historic Gibson Narrow/Tall
Inlays Aged Cellulose Nitrate Trapezoid
Joint Long Tenon, Hide Glue Fit
Neck Material Solid Mahogany
Nut Material Nylon
Nut Width 42.85mm / 1.69in
Profile 1960 SlimTaper V2 C
Scale Length 628.65mm / 24.75in
Electronics Specs
Electronics Specs
Bridge Pickup Custombucker Alnico 3
Controls 2 Volume, 2 Tone, Pull-Pull Coil-Split Neck Pickup
Neck Pickup Custombucker Alnico 3
Output Jack 1/4" Switchcraft
Pickup Selector 3-Way Switchcraft
Hardware Specs
Hardware Specs
Bridge ABR-1
Control Covers Brown Royalite
Control Knobs Butyrate Gold Top Hats
finish Nickel; Murphy Lab Heavy Aged
Jack Plate Cover Laminated Cellulose Acetate Butyrate
Mounting Rings M69 Cellulose Acetate Butyrate
Pickguard Laminated Cellulose Acetate Butyrate
Pickup Covers Authentic Profile Nickel Silver
Strap Buttons Aluminum
Switch Tip Amber Catalin
Switchwasher Replica Cellulose Acetate Butyrate
Tailpiece Lightweight Aluminum Stop Bar
Truss Rod Authentic 1950s No-Tube
Truss Rod Cover Authentic Stepped 2-Ply
Tuner Plating Nickel
Tuning Machines Kluson Single Line, Single Ring
Misc Specs
Misc Specs
Accessories Certificate of Authenticity
Model: LPR57PSL000000294
Case Lifton Reissue 5-Latch Case
Headstock Inlay Gibson logo in Mother of Pearl, Les Paul Model silkscreen
Strings Gauge .010, .013, .017, .026, .036, .046
