Gibson

|

Epiphone

|

Kramer

|

Mesa/Boogie

|

KRK

1/14

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Minder

Guitar Specifications

Body

Binding 1-ply Body and Neck

Lak Body Sunburst Nitrocellulose

Body Laminated Maple

Vorm Body ES-335

Stijl Body ES

Middenblok Maple

Nek

Toetsmateriaal Brazilian rosewood

Toetsradius 304.8mm / 12.0in

Aantal frets 22

Frets Medium (Original)

Inlays Celluloid Small Block

Verbinding Glued, Set Neck

Materiaal Nek Mahogany

Materiaal topkam Bone (Original)

Breedte topkam 41.95mm / 1.65in

Profiel Medium C

Mensuur 628.65mm / 24.75in

Elektronica

Brug pick-up Pat No. (7.41k)

Bediening 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Nek pickup Pat No. (7.40k)

Output jack 1/4"

Pickup-selector 3-way selector

Hardware

Bruggen Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Bedieningsknoppen Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Montageringen Black M-69 Rings

Slagplaten 5-ply Black

Pick-up Covers Chrome Humbucker

Kunststof onderdelen Black

Zadelmateriaal Nylon

Strapbuttons Aluminum

Switch Tip Cream Plastic

Staartstukken Chrome Trapeze tailpiece

Truss Rod Adjustable

Truss Rod Cover Two-ply stepped

Afwerking mechanieken Nickel

Stemmechanieken Kluson Deluxe double line double ring

Diversen

Koffer Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Strings Gauge 10-46

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

New Arrival

Certified Vintage

Sorry, de Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst is niet langer beschikbaar. We hebben deze pagina alleen ter referentie laten staan.

Bekijk de geweldige alternatieven op deze pagina of neem direct contact met ons op als je vragen hebt!

Vergelijkbare producten Ontdek Gibson Certified Vintage Nieuw Binnen Neem contact op met ons

Alle details bekijken

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Minder

Guitar Specifications

Body

Binding 1-ply Body and Neck

Lak Body Sunburst Nitrocellulose

Body Laminated Maple

Vorm Body ES-335

Stijl Body ES

Middenblok Maple

Nek

Toetsmateriaal Brazilian rosewood

Toetsradius 304.8mm / 12.0in

Aantal frets 22

Frets Medium (Original)

Inlays Celluloid Small Block

Verbinding Glued, Set Neck

Materiaal Nek Mahogany

Materiaal topkam Bone (Original)

Breedte topkam 41.95mm / 1.65in

Profiel Medium C

Mensuur 628.65mm / 24.75in

Elektronica

Brug pick-up Pat No. (7.41k)

Bediening 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Nek pickup Pat No. (7.40k)

Output jack 1/4"

Pickup-selector 3-way selector

Hardware

Bruggen Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Bedieningsknoppen Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Montageringen Black M-69 Rings

Slagplaten 5-ply Black

Pick-up Covers Chrome Humbucker

Kunststof onderdelen Black

Zadelmateriaal Nylon

Strapbuttons Aluminum

Switch Tip Cream Plastic

Staartstukken Chrome Trapeze tailpiece

Truss Rod Adjustable

Truss Rod Cover Two-ply stepped

Afwerking mechanieken Nickel

Stemmechanieken Kluson Deluxe double line double ring

Diversen

Koffer Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Strings Gauge 10-46

WARNING:This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.