Tighter, Meaner, and Even Leaner
Stand out from the crowd with this Custom Configured version of the Badlander 50 1x12 Combo, dressed up in stunning two-toned British Garnet Bronco and Black Bronco vinyl that’s paired with a Gray and Black Jute grille and accented with Black piping, heavy-duty Black handle, and Black corners. As with all Celestion-equipped MESA amps, the Celestion Creamback 65W speaker is made in Britain.
Delivering a sonic and weight profile that’s a bit more trim, the Rectifier® Badlander™ 50 holds its own while adding a distinct tonal character to the Badlander Series. Even more aggressive sounding, yet with an inviting, effortless feel, it’s buffed and ready to go places where less output power is the call.
Two identical Channels feature the same 3 new dynamic and duplicated Modes as its 100-Watt counterpart. CLEAN, CRUNCH and CRUSH repeated supply the gain, shaping power and an urgent personality to navigate most ensemble and virtually any recording environments.
Here in the Badlander 50, the 2-Channel preamp hooks up with two different and perfect power displacements that enhance everything from clean to clipped to wildly saturated. The 50 Watt setting delivers bold authority and the highest headroom while the 20-watt setting finds the power tubes re-wired for Triode operation that unveils greater clipping potential and a mid-scooped, harmonic-laden response that reveals trademark EL34 Tone.
A Unique Sonic Profile with Crushing Character
Sometimes less is more, and if that’s your mantra, the Badlander 50 is a perfect fit. Weighing in at considerably less, there are physical considerations at play for sure. Yet the Middleweight contender in the Badlander Family has its own story to tell when it comes to defiant attitude and a rebellious nature. Some feel there is a unique benefit to lower wattage amplifiers, often described as a sense that top end travels more freely and quickly through the circuit. While perhaps a bit over-simplified, truth be told the Badlander in 50 Watt form does display that characteristic along with its bouncy, easy-to-play nature.
CabClone IR with 8 Mesa Virtual IR Cabinets On Board
The Badlander 50 is also the recordist's dream realized. It features our first onboard CabClone™ IR and it delivers seamless DI with Channel Specific IR Assignment of the 8 virtual Cabinets and a Reactive Load that sounds and feels great. Together with the new sounds and the 50’s clip-friendly power range, the most versatile and recordable Recto ever is created, even in “silent mode” when you can’t use your favorite cabinet!
The CabClone IR delivers newfound flexibility, portability and previously only dreamed-of convenience. You now have the ability to go direct silently or with your cab, for recording, stage, or headphone practicing with instant access to 8 real MESA cabinets mic’d in a Pro Environment and library storage for more. It really doesn’t get any better in terms of having consistent tone from venue to venue, with or without a speaker cabinet, your choice.
The built-in, channel-assignable CabClone IR Virtual Cabinet Simulator & Reactive Amp Load comes preloaded with the following 8 Authentic MESA Virtual Cabinet IRs including:
4x12 Rectifier Standard (closed back)
4x12 Rectifier Traditional (closed back)
2x12 Rectifier Horizontal (closed back)
1x12 Rectifier (closed back)
1x12 Thiele (closed back, front-ported)
2x12 Lone Star (open back)
1x12 Lone Star 23 (open back)
1x12 California Tweed 23 (open back)
Designed as an open system, The CabCLone IR is compatible with select Third-Party IRs and a simple USB connection allows open access to download, store, and use your favorite IRs of choice with capacity for extra library storage. USB 2.0 A to B connection cable (not included) is required for managing IR file directory.
50 or 20 Watts at the Switch
The Badlander 50 features our patented Multi-Watt™ Power Switch that offers two wattage settings; A FULL power 50 watts running both EL34s and a HALF power setting reconfigured for Triode wiring producing 20 Watts of clip-able sweetness that also runs the pair of output tubes. Each has its own set of benefits and character and together they provide almost limitless possibilities when you consider the pairings with the available preamp Modes, their gain structures, and dial-able sounds.
Evolution of Recto Tone
If you’re into big, menacing Tone, but don’t need the power or the weight of a classic 100-Watt-er, we invite you to check out what 50 years of designing and building high-performance Tube Amps can serve up in the 50-watt range. From Clean and Crunch on to Modern Era Heavy, experience the Badlander 50 and our latest evolution of Recto tone. It’s a Rectifier at its core, but not the Recto you know.
Specifications
Quick overview
Quick overview
available formats: Head, Rackmount, & 1x12 Combo
channels modes: 2 Channels / 3 Mode Channel Cloning™
dimensions: 19 1/4 H x 22 3/4 W x 10 3/8 D
Foot Switchable Functions: Ch. 1/2
graphic eq reverb fx solo: FX Loop
Mode Voicings Styles: Ch. 1 = Clean, Crunch or Crush (Channel Cloning™) Ch. 2 = Clean, Crunch or Crush (Channel Cloning™)
power tube type: 2x Mesa EL-34 (or 6L6)
speakers impedance: 1 - 8 Ohm Celestion Creamback 65 / Total Load = 8 Ohms
wattage: 50 or 20 Watt Selectable (Global)
weight: 60 Lbs.
Features
Features
amp type: Tube
bias switch for alternate power tubes types: Bias Select for EL-34 or 6L6
cabinet simulation direct liverecording output: Built-in, channel assignable, MESA CabClone™ IR Cab Simulator featuring 8 MESA Cabinet IRs, USB Connection for IR transfers, Internal Amp Load for cabinet-free use, IR Balanced XLR Direct Output, Headphone Output, IR Output Level Control & Ground/Lift Switch
channel controls: Each Channel features Independent 3-Position Style Mode Switch, Gain, Treble, Mid, Bass, Presence, Master and 8-Position CabClone IR Select (back-panel) Controls
chassis material: Aluminum
convection or fan cooling: Convection
effects loop bypass options: Fully Buffered Series Tube FX Loop
extra features: Custom Appointments: Two-tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners.
headphone output: Yes (see Cabinet Simulation for more information)
internal amp load for speaker less performance: Yes (see Cabinet Simulation for more information)
maintenance free fixed bias: Yes
number of footswitchable channels or modes: Two Channels
number of style modes: Three
power amp details class wattage: Class A/B Power with selectable, global 20/50 Power Switch - Provides two power options: Choose 2 power tubes wired in Triode, producing 20 Watts of small block-power or 2 power tubes wired in Pentode, producing 50 Watts of big-block power and punch
power amp tubes: 2x Mesa EL-34 (or 6L6)
preamp tubes: 5x Mesa 12AX7
rectifier type: Silicon Diodes
speaker outputs: One 8 Ohm and Two 4 Ohm
types of style modes per channel: Ch. 1 = Clean, Crunch or Crush (Channel Cloning™) Ch. 2 = Clean, Crunch or Crush (Channel Cloning™)
variac power switch: Full/Variac Power Switch
wattages quick reference: 50 or 20 Watt Selectable (Global)
Cabinet features
Cabinet features
cabinet material: Marine Grade, Baltic Birch
casters: Included - Track-Loc™ Removable Casters
extra features: Custom Configured: Two-tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners
speakers impedance: 1 - 8 Ohm Celestion Creamback 65 / Total Load = 8 Ohms
standard finish options no extra cost: Two-Tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners
Accessories
Accessories
footswitch: Included - 1 Button Footswitch (Ch. 1/2)
slip cover: Included - Fitted Slipcover
Weights and dimensions
Weights and dimensions
depth: 10 3/8
height: 19 1/4
weight: 60 Lbs.
width: 22 3/4
Model: 1.BD5.117D.V06.V0bfv
Mesa/Boogie Custom Configured Badlander 50 1x12 Combo, Two-Tone British Garnet Bronco
Mesa/Boogie Custom Configured Badlander 50 1x12 Combo, Two-Tone British Garnet Bronco
Op Maat Gemaakte Opties Beschikbaar
Op Maat Gemaakte Opties Beschikbaar
Bel ons bij de Gibson Garage in London om uw Custom Configured-versterker samen te stellen. +44 20 4570 5400
5 Jaar Garantie
5 Jaar Garantie
Koop en speel met vertrouwen, wetende dat uw versterker beschermd is door onze beperkte garantie van 5 jaar. Meer informatie over garanties en voorwaarden vindt u hier .
Handbedraad in Californië
Handbedraad in Californië
Elke MESA/Boogie-versterker wordt al meer dan 45 jaar handmatig bedraad in dezelfde faciliteit in Petaluma, Californië.
De Gibson App Drie Maanden Gratis
De Gibson App Drie Maanden Gratis
Alleen voor een beperkte tijd: ontvang een abonnement van drie maanden op de Gibson App gratis bij de aankoop van dit product. Klik hier voor meer informatie over de Gibson App.
Tighter, Meaner, and Even Leaner
Stand out from the crowd with this Custom Configured version of the Badlander 50 1x12 Combo, dressed up in stunning two-toned British Garnet Bronco and Black Bronco vinyl that’s paired with a Gray and Black Jute grille and accented with Black piping, heavy-duty Black handle, and Black corners. As with all Celestion-equipped MESA amps, the Celestion Creamback 65W speaker is made in Britain.
Delivering a sonic and weight profile that’s a bit more trim, the Rectifier® Badlander™ 50 holds its own while adding a distinct tonal character to the Badlander Series. Even more aggressive sounding, yet with an inviting, effortless feel, it’s buffed and ready to go places where less output power is the call.
Two identical Channels feature the same 3 new dynamic and duplicated Modes as its 100-Watt counterpart. CLEAN, CRUNCH and CRUSH repeated supply the gain, shaping power and an urgent personality to navigate most ensemble and virtually any recording environments.
Here in the Badlander 50, the 2-Channel preamp hooks up with two different and perfect power displacements that enhance everything from clean to clipped to wildly saturated. The 50 Watt setting delivers bold authority and the highest headroom while the 20-watt setting finds the power tubes re-wired for Triode operation that unveils greater clipping potential and a mid-scooped, harmonic-laden response that reveals trademark EL34 Tone.
A Unique Sonic Profile with Crushing Character
Sometimes less is more, and if that’s your mantra, the Badlander 50 is a perfect fit. Weighing in at considerably less, there are physical considerations at play for sure. Yet the Middleweight contender in the Badlander Family has its own story to tell when it comes to defiant attitude and a rebellious nature. Some feel there is a unique benefit to lower wattage amplifiers, often described as a sense that top end travels more freely and quickly through the circuit. While perhaps a bit over-simplified, truth be told the Badlander in 50 Watt form does display that characteristic along with its bouncy, easy-to-play nature.
CabClone IR with 8 Mesa Virtual IR Cabinets On Board
The Badlander 50 is also the recordist's dream realized. It features our first onboard CabClone™ IR and it delivers seamless DI with Channel Specific IR Assignment of the 8 virtual Cabinets and a Reactive Load that sounds and feels great. Together with the new sounds and the 50’s clip-friendly power range, the most versatile and recordable Recto ever is created, even in “silent mode” when you can’t use your favorite cabinet!
The CabClone IR delivers newfound flexibility, portability and previously only dreamed-of convenience. You now have the ability to go direct silently or with your cab, for recording, stage, or headphone practicing with instant access to 8 real MESA cabinets mic’d in a Pro Environment and library storage for more. It really doesn’t get any better in terms of having consistent tone from venue to venue, with or without a speaker cabinet, your choice.
The built-in, channel-assignable CabClone IR Virtual Cabinet Simulator & Reactive Amp Load comes preloaded with the following 8 Authentic MESA Virtual Cabinet IRs including:
4x12 Rectifier Standard (closed back)
4x12 Rectifier Traditional (closed back)
2x12 Rectifier Horizontal (closed back)
1x12 Rectifier (closed back)
1x12 Thiele (closed back, front-ported)
2x12 Lone Star (open back)
1x12 Lone Star 23 (open back)
1x12 California Tweed 23 (open back)
Designed as an open system, The CabCLone IR is compatible with select Third-Party IRs and a simple USB connection allows open access to download, store, and use your favorite IRs of choice with capacity for extra library storage. USB 2.0 A to B connection cable (not included) is required for managing IR file directory.
50 or 20 Watts at the Switch
The Badlander 50 features our patented Multi-Watt™ Power Switch that offers two wattage settings; A FULL power 50 watts running both EL34s and a HALF power setting reconfigured for Triode wiring producing 20 Watts of clip-able sweetness that also runs the pair of output tubes. Each has its own set of benefits and character and together they provide almost limitless possibilities when you consider the pairings with the available preamp Modes, their gain structures, and dial-able sounds.
Evolution of Recto Tone
If you’re into big, menacing Tone, but don’t need the power or the weight of a classic 100-Watt-er, we invite you to check out what 50 years of designing and building high-performance Tube Amps can serve up in the 50-watt range. From Clean and Crunch on to Modern Era Heavy, experience the Badlander 50 and our latest evolution of Recto tone. It’s a Rectifier at its core, but not the Recto you know.
Specifications
Quick overview
Quick overview
available formats: Head, Rackmount, & 1x12 Combo
channels modes: 2 Channels / 3 Mode Channel Cloning™
dimensions: 19 1/4 H x 22 3/4 W x 10 3/8 D
Foot Switchable Functions: Ch. 1/2
graphic eq reverb fx solo: FX Loop
Mode Voicings Styles: Ch. 1 = Clean, Crunch or Crush (Channel Cloning™) Ch. 2 = Clean, Crunch or Crush (Channel Cloning™)
power tube type: 2x Mesa EL-34 (or 6L6)
speakers impedance: 1 - 8 Ohm Celestion Creamback 65 / Total Load = 8 Ohms
wattage: 50 or 20 Watt Selectable (Global)
weight: 60 Lbs.
Features
Features
amp type: Tube
bias switch for alternate power tubes types: Bias Select for EL-34 or 6L6
cabinet simulation direct liverecording output: Built-in, channel assignable, MESA CabClone™ IR Cab Simulator featuring 8 MESA Cabinet IRs, USB Connection for IR transfers, Internal Amp Load for cabinet-free use, IR Balanced XLR Direct Output, Headphone Output, IR Output Level Control & Ground/Lift Switch
channel controls: Each Channel features Independent 3-Position Style Mode Switch, Gain, Treble, Mid, Bass, Presence, Master and 8-Position CabClone IR Select (back-panel) Controls
chassis material: Aluminum
convection or fan cooling: Convection
effects loop bypass options: Fully Buffered Series Tube FX Loop
extra features: Custom Appointments: Two-tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners.
headphone output: Yes (see Cabinet Simulation for more information)
internal amp load for speaker less performance: Yes (see Cabinet Simulation for more information)
maintenance free fixed bias: Yes
number of footswitchable channels or modes: Two Channels
number of style modes: Three
power amp details class wattage: Class A/B Power with selectable, global 20/50 Power Switch - Provides two power options: Choose 2 power tubes wired in Triode, producing 20 Watts of small block-power or 2 power tubes wired in Pentode, producing 50 Watts of big-block power and punch
power amp tubes: 2x Mesa EL-34 (or 6L6)
preamp tubes: 5x Mesa 12AX7
rectifier type: Silicon Diodes
speaker outputs: One 8 Ohm and Two 4 Ohm
types of style modes per channel: Ch. 1 = Clean, Crunch or Crush (Channel Cloning™) Ch. 2 = Clean, Crunch or Crush (Channel Cloning™)
variac power switch: Full/Variac Power Switch
wattages quick reference: 50 or 20 Watt Selectable (Global)
Cabinet features
Cabinet features
cabinet material: Marine Grade, Baltic Birch
casters: Included - Track-Loc™ Removable Casters
extra features: Custom Configured: Two-tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners
speakers impedance: 1 - 8 Ohm Celestion Creamback 65 / Total Load = 8 Ohms
standard finish options no extra cost: Two-Tone British Garnet Bronco and Black Bronco Vinyl, Gray and Black Jute Grille, Black Piping, Heavy-duty Black Handle, and Black Leather Corners
Accessories
Accessories
footswitch: Included - 1 Button Footswitch (Ch. 1/2)
slip cover: Included - Fitted Slipcover
Weights and dimensions
Weights and dimensions
depth: 10 3/8
height: 19 1/4
weight: 60 Lbs.
width: 22 3/4
Model: 1.BD5.117D.V06.V0bfv
