The wait is over–the Les Paul Custom is back!
The Les Paul™ Custom was first introduced in 1953 as an upscale version of the Les Paul model. The model was requested by Les Paul himself, who wanted a black version of the Les Paul guitar that “looked like a tuxedo.” In 1961, the single cutaway Les Paul Custom was discontinued in favor of a new double-cutaway model that would later become known as the SG™ Custom, and the original single cutaway model was reintroduced in 1968. During the 1970s, production of the Les Paul Custom transitioned from Kalamazoo to Nashville, and the Les Paul Custom received various changes that further refined the model, including a multi-piece maple top that replaced the original all-mahogany-body construction along with a new maple neck. Today, these 70s-era Les Paul Customs are some of the fastest-appreciating guitars on the vintage market. Now, after 20 years of offering the Les Paul Custom only through Gibson Custom, Gibson is proud to release the Les Paul Custom 70s. It features classic 1970s specs, including a mahogany body with a three-piece maple top. The body is bound with 5-ply top binding and 3-ply back binding. The maple neck has a 70s profile and a volute and is topped with a bound ebony fretboard with 22 medium jumbo frets and mother-of-pearl block inlays. The bound headstock is also adorned with mother-of-pearl in the form of the famous Custom Split Diamond mother-of-pearl headstock inlay, which originated with the Gibson Super 400 and has become synonymous with the Les Paul Custom. The Les Paul Custom 70s features gold hardware, including an aluminum Nashville Tune-O-Matic bridge, an aluminum Stop Bar tailpiece, and smooth-turning Grover® Rotomatic® with Keystone button tuners for reliable tuning stability. Even the smallest details have been recreated, including Posi-Lok™ strap locks, a 5-ply pickguard, and 70s-era-approved Witch Hat control knobs. The electronics are also era-appropriate, with a pair of Calibrated T-Type humbuckers™ with individual volume and tone controls that are hand-wired to Orange Drop® capacitors. The Les Paul Custom 70s is available in four gloss nitrocellulose lacquer finishes, including Ebony, Tobacco Burst, Wine Red, and even a version with a beautiful Buttercream Top, and each comes packed in a hardshell case for protection when it’s in storage and traveling. The wait is over–The Les Paul Custom has returned to the Gibson USA lineup and is ready to rock your world!
Highlights
- Corpo in mogano
- Three-piece plain maple top
- Maple neck with volute and 70s profile
- Ebony fretboard with mother-of-pearl block inlays
- Calibrated T-type pickups
- Hardware dorato
- Custodia rigida Gibson
Specifiche
Corpo
Corpo
Binding Multi-ply Top, Back, and Headstock, Single-ply Fretboard
Body Finish Gloss Nitrocellulose Lacquer
Body Mahogany
Forma Del Corpo Les Paul
Tipi di corpo Les Paul
Top Maple
Manico
Manico
Materiale della tastiera Ebony
Raggio della tastiera 304.8mm / 12.0in
Fret Count 22
Tasti Medium Jumbo
Intarsi Mother of Pearl Block
Joint Glued In, Set Neck
Materiale del manico Maple
Materiale del capotasto Graph Tech
Larghezza del capotasto 43.05mm / 1.7in
Profilo 70s, With Volute
Lunghezza della scala 628.65mm / 24.75in
Elettronica
Elettronica
Pickup al ponte Calibrated T-Type Bridge
Controlli 2 Volume, 2 Tone; Hand-wired with Orange Drop Capacitors
Pickup al manico Calibrated T-Type Neck
Jack di uscita 1/4"
Selettore del pickup 3-way Toggle
Hardware
Hardware
Ponti Aluminum Nashville Tune-O-Matic
Manopole di controllo Black Witch Hat with Gold Insert
finish Gold
Coperchio della piastra dello spinotto (jack) Gold
Mounting Rings Black
Battipenna 5-ply Black
Coperture per pickup Gold
Bottoni della tracolla 2 - Posi-Lok
Tipo di interruttore Cream
Switchwasher Black with Gold Text
Cordiere Aluminum Stop Bar
Truss Rod Adjustable
Placcatura del sintonizzatore Gold
Meccaniche Grover Rotomatic with Keystone Button
Varie
Varie
Accessori Includes Gibson Accessory Kit
Model: LPCU700BCGH1
Custodie Hardshell
Headstock Inlay Gibson Logo and Custom Split Diamond Inlay in Mother of Pearl
Stringhe di forza .010, .013, .017, .026, .036, .046
Gibson Les Paul Custom 70s, Buttercream Top
Gibson Les Paul Custom 70s, Buttercream Top
Get 5 free Maestro pedals!
Get 5 free Maestro pedals!
Receive 5 Maestro Pedals at no extra cost with the purchase of this product.All qualifying orders placed during the promotional period will receive 5 Maestro Pedals (SKU: Discoverer Delay, Titan Boost, Ranger Overdrive, Comet Chorus, Mariner Tremolo), shipped with final order.
Garanzia a vita
Garanzia a vita
Gli strumenti sono coperti dalla nostra garanzia a vita, che ti permette di fare acquisti e suonare nella massima serenità. Per ulteriori informazioni sulle garanzie e sulle esclusioni, fai clic qui .
Custodia inclusa
Custodia inclusa
Lo strumento viene fornito con una custodia rigida o morbida inviata dalla fabbrica, per trasportarlo e conservarlo in tutta sicurezza. Per ulteriori dettagli, fare riferimento alle specifiche del prodotto.
Setup incluso
Setup incluso
I nostri tecnici specializzati eseguono un'ispezione finale minuziosa e un setup dettagliato prima che lo strumento venga imballato e spedito.
The wait is over–the Les Paul Custom is back!
The Les Paul™ Custom was first introduced in 1953 as an upscale version of the Les Paul model. The model was requested by Les Paul himself, who wanted a black version of the Les Paul guitar that “looked like a tuxedo.” In 1961, the single cutaway Les Paul Custom was discontinued in favor of a new double-cutaway model that would later become known as the SG™ Custom, and the original single cutaway model was reintroduced in 1968. During the 1970s, production of the Les Paul Custom transitioned from Kalamazoo to Nashville, and the Les Paul Custom received various changes that further refined the model, including a multi-piece maple top that replaced the original all-mahogany-body construction along with a new maple neck. Today, these 70s-era Les Paul Customs are some of the fastest-appreciating guitars on the vintage market. Now, after 20 years of offering the Les Paul Custom only through Gibson Custom, Gibson is proud to release the Les Paul Custom 70s. It features classic 1970s specs, including a mahogany body with a three-piece maple top. The body is bound with 5-ply top binding and 3-ply back binding. The maple neck has a 70s profile and a volute and is topped with a bound ebony fretboard with 22 medium jumbo frets and mother-of-pearl block inlays. The bound headstock is also adorned with mother-of-pearl in the form of the famous Custom Split Diamond mother-of-pearl headstock inlay, which originated with the Gibson Super 400 and has become synonymous with the Les Paul Custom. The Les Paul Custom 70s features gold hardware, including an aluminum Nashville Tune-O-Matic bridge, an aluminum Stop Bar tailpiece, and smooth-turning Grover® Rotomatic® with Keystone button tuners for reliable tuning stability. Even the smallest details have been recreated, including Posi-Lok™ strap locks, a 5-ply pickguard, and 70s-era-approved Witch Hat control knobs. The electronics are also era-appropriate, with a pair of Calibrated T-Type humbuckers™ with individual volume and tone controls that are hand-wired to Orange Drop® capacitors. The Les Paul Custom 70s is available in four gloss nitrocellulose lacquer finishes, including Ebony, Tobacco Burst, Wine Red, and even a version with a beautiful Buttercream Top, and each comes packed in a hardshell case for protection when it’s in storage and traveling. The wait is over–The Les Paul Custom has returned to the Gibson USA lineup and is ready to rock your world!
Highlights
- Corpo in mogano
- Three-piece plain maple top
- Maple neck with volute and 70s profile
- Ebony fretboard with mother-of-pearl block inlays
- Calibrated T-type pickups
- Hardware dorato
- Custodia rigida Gibson
Specifiche
Corpo
Corpo
Binding Multi-ply Top, Back, and Headstock, Single-ply Fretboard
Body Finish Gloss Nitrocellulose Lacquer
Body Mahogany
Forma Del Corpo Les Paul
Tipi di corpo Les Paul
Top Maple
Manico
Manico
Materiale della tastiera Ebony
Raggio della tastiera 304.8mm / 12.0in
Fret Count 22
Tasti Medium Jumbo
Intarsi Mother of Pearl Block
Joint Glued In, Set Neck
Materiale del manico Maple
Materiale del capotasto Graph Tech
Larghezza del capotasto 43.05mm / 1.7in
Profilo 70s, With Volute
Lunghezza della scala 628.65mm / 24.75in
Elettronica
Elettronica
Pickup al ponte Calibrated T-Type Bridge
Controlli 2 Volume, 2 Tone; Hand-wired with Orange Drop Capacitors
Pickup al manico Calibrated T-Type Neck
Jack di uscita 1/4"
Selettore del pickup 3-way Toggle
Hardware
Hardware
Ponti Aluminum Nashville Tune-O-Matic
Manopole di controllo Black Witch Hat with Gold Insert
finish Gold
Coperchio della piastra dello spinotto (jack) Gold
Mounting Rings Black
Battipenna 5-ply Black
Coperture per pickup Gold
Bottoni della tracolla 2 - Posi-Lok
Tipo di interruttore Cream
Switchwasher Black with Gold Text
Cordiere Aluminum Stop Bar
Truss Rod Adjustable
Placcatura del sintonizzatore Gold
Meccaniche Grover Rotomatic with Keystone Button
Varie
Varie
Accessori Includes Gibson Accessory Kit
Model: LPCU700BCGH1
Custodie Hardshell
Headstock Inlay Gibson Logo and Custom Split Diamond Inlay in Mother of Pearl
Stringhe di forza .010, .013, .017, .026, .036, .046
