The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
Head-Track Head & FX Loop Switcher
Head-Track Head & FX Loop Switcher
Garantie limitée
Garantie limitée
Achetez et jouez l’esprit tranquille : votre amplificateur est protégé par notre garantie limitée de 5 ans. Pour en savoir plus sur les garanties et les exclusions, cliquez ici .
Câblé à la main en Californie
Câblé à la main en Californie
Depuis plus de 45 ans, chaque amplificateur Mesa/Boogie est câblé à la main dans la même usine de Petaluma, en Californie.
Trois Mois Gratuits de l’Application Gibson
Trois Mois Gratuits de l’Application Gibson
Pour une durée limitée : recevez un abonnement gratuit de trois mois à l’application Gibson à l’achat de ce produit. Cliquez ici pour en savoir plus sur l’application Gibson.
The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
