The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
Head-Track Head & FX Loop Switcher
Head-Track Head & FX Loop Switcher
Envío Gratis & Rápido
Envío Gratis & Rápido
Los pedidos realizados antes de la 1:00 PM de lunes a viernes se procesarán el mismo día. Los pedidos realizados después de este horario se enviarán el siguiente día hábil. Todos los pedidos superiores a 50 € reciben envío estándar gratuito.
Garantía Limitada
Garantía Limitada
Compra y toca con confianza sabiendo que tu amplificador está protegido por nuestra garantía limitada de 5 años. Aprende más sobre garantías y exclusiones aquí .
Fabricado a Mano en California
Fabricado a Mano en California
Cada amplificador MESA/Boogie ha sido cableado a mano durante más de 45 años en la misma instalación de Petaluma, California.
The Head-Track™ gives you the ability to instantly select between two amplifiers, yet employ the same Speaker Cabinet and Effects setup. It is intended for use near the amplifiers being switched to maintain the shortest Cable lengths, thereby protecting the integrity of your signal, and has a Remote Switch jack so that a simple On/Off MIDI switching function, or Latching Footswitch located on your pedal-board, can control the switching. There is also an on-board Footswitch to switch between the two amps from the unit itself in the rare instance where the Head-Track might be used on the Pedal-Board.
INPUTS from Instrument, Amplifier Effects Loop Sends (2), Effect(s) Output and Amplifier Speaker Outputs (2) along with OUTPUTS to Amplifier Inputs (2), Amplifier Effects Loop Returns (2), Effect(s) Input and the Speaker Cabinet Input (or Load Device) being shared are provided. The Head-Track can be powered by an external 9 Volt DC/200 mA wall-mount power supply (not included).
