














1967 Epiphone Sheraton Sunburst

1967 Epiphone Sheraton, Serial Number 892076
Built in the same Kalamazoo factory as its Gibson counterparts, the Sheraton was Epiphone’s top-of-the-line semi-hollow model in the 1960s. Combining ornate appointments with a centerblock design, mini humbuckers™, and a Frequensator tailpiece, the Sheraton offered refined tone and stage-ready reliability for jazz, blues, and soul players alike.
This Gibson Certified Vintage 1967 Sheraton is a clean and well-maintained instrument, with only light checking, minimal wear, and no major nicks or dings. The guitar underwent a plane and re-fret at Gibson Repair & Restoration and has a new bone nut. The original celluloid pickguard had deteriorated and tarnished some of the gold hardware; the hardware has since been cleaned, and a high-quality reproduction pickguard with a raised Epiphone logo has been installed. The original bridge, which shows signs of collapsing, is included in the case, and an aged Gibson Custom ABR-1 wire bridge has been installed.
A fantastic example of a late-60s Sheraton, this one plays and sounds as good as it looks! Includes its original black and goldenrod Ess & Ess hardshell case.
Body Style
ES
Body Shape
Sheraton
Body Material
Laminated Maple/Poplar/Maple
Centerblock
Maple
Binding
7-ply Top and Headstock, 3-ply Back, 5-ply Fretboard
Body Finish
Gloss Nitrocellulose Lacquer
Profile
Medium C
Scale Length
628.65 mm / 24.75 in
Fingerboard Material
Rosewood
Fingerboard Radius
304.8 mm / 12 in
Neck Material
Mahogany
Fret Count
22
Frets
Medium Jumbo (Refret)
Nut Material
Bone
Nut Width
41.0718 mm / 1.617 in
Inlays
Split Mother of Pearl Block with Abalone V
Joint
Glued In, Set Neck
Finish
Gold
Bridge
Aged Gold Wire ABR-1 (Custom Shop Replica Installed, Original in the Case)
Saddle Material
Brass
Tailpiece
Frequensator
Tuning Machines
Grover Rotomatic Patent Pending
Pickguard
Reproduction 5-ply Bound Celluloid with Raised Epiphone Logo
Truss Rod
Adjustable
Truss Rod Cover
2-ply Epiphone
Control Knobs
Gold Top Hat with Reflector
Switch Tip
Cream Plastic
Plastic Parts
Black
Strap Buttons
Gold-plated Nickel
Mounting Rings
Black
Pickup Covers
Gold
Neck Pickup
Gibson Mini Humbucker (6.69k)
Bridge Pickup
Gibson Mini Humbucker (6.68k)
Controls
2 Volume, 2 Tone
Pickup Selector
3-way Toggle
Output Jack
1/4"
Strings Gauge
.010, .013, .017, .026, .036, .046
Case
Original Black and Gold Hardshell
Accessories
Letter of Appraisal, Certificate of Authenticity, and New Limited Lifetime Warranty