









SJ-200 5A Maple Wildfire Burst
Gibson Custom Select SJ-200 acoustic-electric guitar with a AAA Sitka spruce top, 5A maple back and sides, ebony fingerboard, and ebony Moustache bridge

SJ-200 with 5A Maple Back and Sides in a Stunning Wildfire Burst Finish
The Gibson Custom Select SJ-200™ 5A Maple features some of the finest tonewoods that Gibson has to offer. This special guitar is possible thanks to Custom Select, a collection of guitars that are made in small batches with unique, hand-picked features chosen by guitar specialists. Striking finishes and distinctive features such as highly figured tonewoods can be found in the Gibson Custom Select Collection. This Gibson Custom Select SJ-200 5A Maple is handcrafted by skilled craftspeople at the Gibson Custom Shop in Bozeman, Montana. Highly figured 5A maple back and sides are on display on this SJ-200, along with a few more unique features.
Originally released in 1937, the SJ-200 has been the flagship acoustic guitar in the Gibson lineup. Known for its responsiveness and classic styling, the SJ-200 is rightfully known as the “King of the Flat-tops.” With a 17-inch lower bout, this acoustic covers a wide range of sonic territory. The SJ-200’s snappy attack comes partly from a longer scale length of 25.5” rather than the 24.75” scale length featured on most Gibson acoustic guitars. With the sheer size and grandiose styling of the SJ-200, the guitar is often referred to as the grand piano of acoustic guitars for good reason.
This Gibson Custom Select SJ-200 5A Maple is finished in a Wildfire Burst finish, which takes inspiration from decades upon decades of Gibson sunburst finishes. More splashes of sunburst are revealed on the back and sides of the guitar as well as on the AAA flame maple neck. This SJ-200 uses hand-selected tonewoods from the finest materials the Gibson Custom Shop in Bozeman, Montana, has to offer. The 5A maple back and sides paired with a AAA Sitka spruce top make for an impressive combination. The signature 2-bar Moustache™ bridge is expertly carved from a solid piece of ebony with two pieces of mother of pearl inlaid behind the saddle. A bound ebony fingerboard with abalone graduated crown inlays lays on top of the 2-piece AAA flame maple neck with a rounded neck profile. The end of the fingerboard features the “bird’s beak” design, which finishes off the fingerboard with elegance. More abalone details are featured throughout the guitar, including the rosette and headstock inlays that add to the guitar’s distinguished appearance.
Not only does this SJ-200 fit in at home and in the studio, but it also can be used on stage. The onboard L.R. Baggs™ Elite pickup system uses two under-saddle transducers that accurately reproduce the guitar’s sound through a PA system or amplifier. The output jack is at the endpin, so there are no unnecessary holes in the guitar’s side. A TUSQ® nut, saddle, and bridge pins are featured on the guitar to ensure that none of the strings’ energy is wasted. Grover® Imperial™ tuners ensure reliable tuning stability regardless of what environment the guitar is being used.
Handcrafted in Bozeman, Montana, this Gibson Custom Select SJ-200 5A Maple is stunning from every angle. The 5A figured maple looks almost 3-dimensional depending on the viewing angle and how light reflects off the surface. With its exquisite materials and a beautiful Wildfire Burst finish, this SJ-200 brings a new meaning to “King of the Flat-tops.” Included with the guitar is an SJ-200 Deluxe hardshell case and a Gibson Custom Certificate of Authenticity.
Key Features
- AAA Sitka Spruce Top
- Hand-Selected 5A Maple Back and Sides
- Exclusive Wildfire Burst Finish
- 2-Bar Ebony Moustache Bridge
Body Style
Super Jumbo
Body Shape
SJ-200
Body Material
5A Maple
Top
Sitka Spruce
Back
5A Maple
Side
5A Maple
Bracing
Traditional Hand-Scalloped X-Bracing
Body Finish
Gloss Nitrocellulose Lacquer
Profile
Rounded
Scale Length
647.7 mm / 25.5 in
Fingerboard Material
Ebony
Fingerboard Radius
304.8 mm / 12 in
Neck Material
2-Piece Maple
Fret Count
20
Frets
Standard
Nut Material
TUSQ
Nut Width
43.815 mm / 1.725 in
Inlays
Abalone Graduated Crowns
Joint
Compound Dovetail Neck-to-body Joint; Hot Hide Glue
Finish
Gold
Bridge
Two bar SJ-200 Moustache; Rosewood
Saddle Material
TUSQ
Tuning Machines
Grover Imperial
Pickguard
SJ-200 Cream Flower with Border and Dots
Truss Rod
Adjustable
Truss Rod Cover
2-ply Bell, Black and White
Bridge Pins
TUSQ
Strap Buttons
Gold
Under Saddle Pickup
L.R. Baggs HiFi
Controls
Soundhole-mounted Volume and Tone
Output Jack
1/4" Endpin
Strings Gauge
.012, .016, .024, .032, .042, .053
Case
Gibson Hardshell