Skip to product information
1/14

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Specifications

Body Specs

Binding 1-ply Body and Neck

Body Finish Sunburst Nitrocellulose

Body Material Laminated Maple

Body Shape ES-335

Body Styles ES

Centerblock Maple

Neck Specs

Fingerboard Material Brazilian rosewood

Fingerboard Radius 304.8mm / 12.0in

Fret Count 22

Frets Medium (Original)

Inlays Celluloid Small Block

Joint Glued, Set Neck

Neck Material Mahogany

Nut Material Bone (Original)

Nut Width 41.95mm / 1.65in

Profile Medium C

Scale Length 628.65mm / 24.75in

Electronics Specs

Bridge Pickup Pat No. (7.41k)

Controls 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Neck Pickup Pat No. (7.40k)

Output Jack 1/4"

Pickup Selector 3-way selector

Hardware Specs

Bridge Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Control Knobs Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Mounting Rings Black M-69 Rings

Pickguard 5-ply Black

Pickup Covers Chrome Humbucker

Plastic Parts Black

Saddle Material Nylon

Strap Buttons Aluminum

Switch Tip Cream Plastic

Tailpiece Chrome Trapeze tailpiece

Truss Rod Adjustable

Truss Rod Cover Two-ply stepped

Tuner Plating Nickel

Tuning Machines Kluson Deluxe double line double ring

Misc Specs

Case Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Strings Gauge 10-46

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst

New Arrival
Certified Vintage

Sorry, the Gibson Certified Vintage 1965 Gibson ES-335TD, Sunburst is no longer available. We've left this page up for reference only.

Check out the great alternatives on this page or reach out to us directly with any questions!

View full details

1965 Gibson ES-335TD, Serial Number 360624

This 1965 Gibson ES-335TD spent its entire life in West Michigan just a short distance from where it was crafted. It’s an incredibly clean example of our semi-hollow thinline electric from one of our most transitional years. Shipped from Kalamazoo on November 18, 1965, this guitar comes in its equally clean original Lifton case with some fun case candy to top it all off.

This ES-335 features a warm iced-tea sunburst finish with subtle figure across the top and light, even checking throughout. The most notable wear on the guitar consists of two small dings through the finish on the back of the body.

In 1965 we see a range of spec changes—including nut width, plating material, and other component shifts—and this ES-335 lands squarely in the middle of these transitional features: a mix of nickel and chrome hardware (nickel ABR-1 bridge and pickguard bracket paired with chrome pickup covers and trapeze tailpiece), as well as gold-insert tone knobs and silver-insert volume knobs.

The neck profile is a very comfortable full medium C with a beautiful, dark Brazilian rosewood fingerboard. The original frets are in excellent condition, and the guitar plays cleanly up and down the neck. Both original Patent No. humbuckers remain untouched, reading 7.40k in the neck and 7.41k in the bridge, and deliver a balanced, articulate, open tone. All solder is original, and the wiring harness features CTS potentiometers and Sprague “Black Beauty” capacitors.

The original ABR-1 bridge (included in the case), which had begun to collapse slightly, has been replaced with a Gibson Custom Shop wired ABR-1 aged to match. The original bone nut had previously been re-slotted for the B and low E strings for proper spacing and remains fully functional. The original short 5-ply black pickguard has curled quite a bit—as is common with vintage celluloid guards—but remains stable and does not interfere with playing.

The original black-and-goldenrod Lifton hardshell case is equally clean, complete with the guitar’s original inspection slip, ABR-1 adjustment instructions, and humbucking pickup instructions.

An exceptional, all-original ES-335 from the tail end of the wide-nut era—a phenomenal collector-grade piece that’s also a superb player.

This guitar has received a professional setup and thorough inspection from Gibson Certified Vintage and comes with a Certificate of Authenticity, Letter of Appraisal, and new Limited Lifetime Warranty.

Weight: 7.94 lb
Depth at 1st Fret: .83”
Depth at 12th Fret: .98”

Specifications

Body Specs

Binding 1-ply Body and Neck

Body Finish Sunburst Nitrocellulose

Body Material Laminated Maple

Body Shape ES-335

Body Styles ES

Centerblock Maple

Neck Specs

Fingerboard Material Brazilian rosewood

Fingerboard Radius 304.8mm / 12.0in

Fret Count 22

Frets Medium (Original)

Inlays Celluloid Small Block

Joint Glued, Set Neck

Neck Material Mahogany

Nut Material Bone (Original)

Nut Width 41.95mm / 1.65in

Profile Medium C

Scale Length 628.65mm / 24.75in

Electronics Specs

Bridge Pickup Pat No. (7.41k)

Controls 2 Volume, 2 Tone, CTS Potentiometers, Sprague “Black Beauty” Capacitors

Neck Pickup Pat No. (7.40k)

Output Jack 1/4"

Pickup Selector 3-way selector

Hardware Specs

Bridge Aged Gibson Custom Wired Bridge w/ Nylon Saddles (Nickel) (Original in case)

Control Knobs Gold Top Hats with Silver Inserts (Volume) Gold Top Hats with Gold Inserts (Tone)

finish Nickel / Chrome

Mounting Rings Black M-69 Rings

Pickguard 5-ply Black

Pickup Covers Chrome Humbucker

Plastic Parts Black

Saddle Material Nylon

Strap Buttons Aluminum

Switch Tip Cream Plastic

Tailpiece Chrome Trapeze tailpiece

Truss Rod Adjustable

Truss Rod Cover Two-ply stepped

Tuner Plating Nickel

Tuning Machines Kluson Deluxe double line double ring

Misc Specs

Case Original Black/Goldenrod Lifton case

Model: GCVP0160

Headstock Open book

Headstock Inlay Gibson Logo and Crown Inlay in Mother of Pearl

Strings Gauge 10-46