USA: 1-800-4GIBSON
Europe: 00+8004GIBSON1
GibsonProductsNews-LifestyleCommunityStore24/7 Support

Pickups Model
The Custom Shop 50th Anniversary 1960 Les Paul Standard is equipped with a set of Gibson’s popular BurstBucker humbucking pickups, which comprises a BurstBucker 1 in the neck position and a slightly hotter BurstBucker 2 in the bridge position, for the perfect output balance between the two pickup selections.

BurstBuckers are made with unpolished Alnico II magnets and coils that are wound to slightly different numbers of turns of 42-gauge plain enamel coated wire, like the originals. While using two slightly mismatched coils depletes a humbucking pickup’s noise-canceling abilities slightly, it also gives the pickup a little more edge—a sound that you could even say comes a little closer to single-coil bite—than can be achieved with perfectly balanced coils.
Magnet Material
Gibson’s BurstBuckers use unpolished Alnico II bar magnets, just like many of the most prized original PAF humbuckers. Magnet Material
Tonal Characteristics
The BurstBucker 1 is slightly underwound to achieve an output toward the lower-medium end of the PAF range, and it offers added clarity mixed with vowel-like tone in the neck position, with the bonus of good volume balance when paired with a BurstBucker 2 in the bridge position.

The “2” has a slightly hotter output in the range of some of the more over-wound PAFs of the era, for more grind and sustain from the bridge position. Between them, they accurately translate all the warmth, depth, and clarity of the Custom Shop 50th Anniversary 1960 Les Paul Standard’s woods into a tone that is rich yet crisp and can range from an aggressive wail to a mellow moan, all at the flick of a switch and the turn of a knob…just like the original ’60 ’Burst.
Volume and Tone Controls
Just like the original, the Custom Shop 50th Anniversary 1960 Les Paul Standard uses an independent Volume and Tone control for each pickup. These consist of a quality CTS 500k audio-taper potentiometer for a smooth, natural roll-off. Tone and Volume Controls
Toggle Switch
The Custom Shop 50th Anniversary 1960 Les Paul Standard features the classic three-way Switchcraft toggle switch with vintage plastic tip. Toggle Switch
Output Jack
The guitar features a 1⁄4” output jack made by Switchcraft, for years of trouble-free service. Output Jacks